Video door phones + CCTV

[zazu 0]

Is it possible to integrate video door phones with CCTV cameras (separate manufacturers)? and If so what would you need?

The numbers I'm dealing with here are 12 video door phones and 3 CCTV .Wireless or wired either solution would be highly appreciated.

[Soundy 1]

Sure it's possible... the door phone system has to support it.

[SectorSecurity 0]

Do not go wireless, most doorbell systems can use existing wiring. Wireless works best on line of sight, and you will most likely get a lot of interference on it. If the video door phones use BNC to transmit video then you could use a T splitter to get it to both the doorbell monitor and the DVR for your CCTV system.

[ethanw 0]

I am also looking into this. The only problem I have is that I only have 2 wires running to the doorbell (my builder screwed up the CAT5 drop there) so I need to run something over the 2 wires. I do have a CAT5 above the door for the walkway camera but that won't work to get a full face kind of thing

[tomcctv 190]

I am also looking into this. The only problem I have is that I only have 2 wires running to the doorbell (my builder screwed up the CAT5 drop there) so I need to run something over the 2 wires. I do have a CAT5 above the door for the walkway camera but that won't work to get a full face kind of thing

 

 

 

2 wire system

 

[ethanw 0]

Thank you Sir. Not bad. Definitely on my radar now Thanks for making me spend more money

So this is the DRC-22BS

 

Now I gotta figure out if I can get this to interface with my DoorBell system and the VoIP Interfone that I currently have setup at my front door

 

I am also looking into this. The only problem I have is that I only have 2 wires running to the doorbell (my builder screwed up the CAT5 drop there) so I need to run something over the 2 wires. I do have a CAT5 above the door for the walkway camera but that won't work to get a full face kind of thing

2 wire system