Fraenkyboy 0 Posted January 8, 2012 I have big problems with my computer Intel GM945 and my Geovison GV800 card. The computer works 100% all updates all OK, but if I start the geovison main programm so the programm is very slow. I look in the task manager = GV800.exe 50% CPU process and DmHealthSvr.exe 50% CPU process is the problem. I have shut down DmHealthSvr.exe but in this case the GV800.exe goes near 100% CPU process??? After 5 minutes starts the geovision main program but very slowly. The problem ist the CPU process from this files. I have clean, reinstall, install all geovison files (Windows, Windows\System32, Windows\System\drivers , all all all all drivers, complete registry and have all new installed on 3 days but everything is the same. What is here going on? Please help. My nerv i in the end ;-( BR Fraenkyboy Share this post Link to post Share on other sites
Seedigital 0 Posted January 8, 2012 3.51 from memory should be a 3.51 (s) card in which case you can run a much later version of the software on a 32bit os, I'd give 8.4.0.1 a crack and see what happens. Best of Luck Share this post Link to post Share on other sites
