Anyone know of a DVR that supports URL static image

[mpovolo 0]

Apparently there are some that you can http to and get a static image of any camera. There would be a slightly different url for each camera.

 

Anyone seen any, so far I have tried three different ones and appreantly they dont support it.

 

thanks

[tomcctv 190]

Apparently there are some that you can http to and get a static image of any camera. There would be a slightly different url for each camera.

 

Anyone seen any, so far I have tried three different ones and appreantly they dont support it.

 

thanks

 

 

aver does. you need to look at DVRs with java

 

 

http://remote.aver.com/mobile/

[Soundy 1]

Vigils do it as well.

[mpovolo 0]

Apparently there are some that you can http to and get a static image of any camera. There would be a slightly different url for each camera.

 

Anyone seen any, so far I have tried three different ones and appreantly they dont support it.

 

thanks

 

 

aver does. you need to look at DVRs with java

 

 

http://remote.aver.com/mobile/

 

 

 

 

I went this route, however when I http to it I do not get any static images. Not really sure if I need to set something up specific to make it work.

[tomcctv 190]

there are a few ways. just add camera number at end

 

 

http://remote.aver.com/mobile/channel1.html

 

http://remote.aver.com/mobile/channel2.html

[mpovolo 0]

Still doesn't work for me. I get a blank page.

[tomcctv 190]

Still doesn't work for me. I get a blank page.

 

 

 

 

 

you get a blank page when you click on the links ???

[mpovolo 0]

No, when I click on your links it works.

 

If I change the stuff before /mobile to my network info it doesn't work

[tomcctv 190]

hi. i see what you are trying to do. the way the links are work for you and you are seeing if the /mobile side works for your dvr.

 

sorry i thought you was asking for a dvr that does it (thats way i pasted the aver)

 

no the /mobile will not work for you. can you name your dvr ??. if your dvr supports mobile viewing via the synbian then you can try and break down the java stream.

[mpovolo 0]

I am asking for a DVR that will allow me from a PC, enter into a browser a URL that will go into the DVR and give me a digital still of one of the cameras.

[shockwave199 0]

Sounds like you want to take a snapshot of any cameras channel hooked up the dvr while either in activex web application or CMS remote software for the dvr. I'm gonna guess they all do this. For my qsee dvr, within the activex web application and CMS you can take a snapshot of anything live on a channel, as well as during playback. I would think most, if not all remote capable dvr's support that. If...that's what you mean.

Edited January 23, 2012 by Guest

[tomcctv 190]

Apparently there are some that you can http to and get a static image of any camera. There would be a slightly different url for each camera

 

 

ok that not what you asked for in your first post.

 

(but you stll can print.) just save image.

 

I am asking for a DVR that will allow me from a PC, enter into a browser a URL that will go into the DVR and give me a digital still of one of the cameras.

 

 

this is on most good DVR/NVRs just look for snap shot function

[mpovolo 0]

Thanks all for your help but I am not explaining properly. I have a home automation system that allows me to use IP cameras. The setup is quite simple, you provide the IP of the camera and the URL for streaming images. The home automation just pulls digital stills from that URL.

I should be able to do the same with certain DVR's, where I again enter the IP of the DVR and a URL for streaming images. I have seen some people successfully do it with a particular Q-See, SVATT at one time allowed it but not on their newer DVR's. I have no clue how this actually works, I do know that it should work if I can use a PC browser such as IE and enter in the specific URL, if I get a single picture back, it works.

 

Last I also heard Nuvico allows it.

thanks all

[SEANHAWG 1]

You could set up the images to be sent via an FTP account. Are you looking for the images to be stored somewhere?

[tomcctv 190]

IP of the camera and the URL for streaming images

 

 

 

ok two more for you to try. see if any work.

 

http://remote.aver.com/mobile/channel1.html

 

http://remote.aver.com/mobile/channel1.jpg

 

 

 

 

and you should get both like this.

[mpovolo 0]

nope, neither of those formats work, blank page. I even tried entering the port number.

 

Does this work for anyone with a windows/mac browser

[tomcctv 190]

Does this work for anyone with a windows/mac browser

 

 

do these links work for anyone else ???

 

 

 

hi. if you are clicking on the links and getting nothing .... then you have a problem with either your network

 

the top link is a java shot. .... the bottom link is a direct jpeg shot...

 

 

http://remote.aver.com/mobile/channel1.html

 

 

http://remote.aver.com/mobile/channel1.jpg

 

if the bottom one still does not open copy and paste into browser.

[mpovolo 0]

Sorry, the links you posted work on my PC. From what I understand I should be able to replace the stuff before /mobile with my IP of my dvr and it should work on my network for my DVR

 

Not sure who's pictures your link is to but I want my camera pictures not yours:-)

[tomcctv 190]

Sorry, the links you posted work on my PC. From what I understand I should be able to replace the stuff before /mobile with my IP of my dvr and it should work on my network for my DVR

 

Not sure who's pictures your link is to but I want my camera pictures not yours:-)

 

 

Re: Anyone know of a DVR that supports URL static image

 

 

well you did ask if anyone knows of a dvr that can.

 

 

but also if you read though the posts you was also asked.. .> if you are trying to do this on your own dvr CAN YOU LIST THE MAKE of yours.

 

 

 

if you ask a question and hide 90% of the question then no one can help.

[mpovolo 0]

I just got the aver eh1004

 

Sorry for not being clear.