williamherreratx 0 Posted January 17, 2012 I have a Pelco DX8100 and can not for the life of me get the DVR to connect to the Camera. When I connect the video, I can see that, but I can not get the RX/TX setup to control the settings and PTZ controls. I've tried: Config #1 DVR (Pin 8 rx+) to Camera (TXD) DVR (Pin 2 tx-) to Camera (RXD) Config #2 DVR (Pin 8 rx+) to Camera (RXD) DVR (Pin 2 tx-) to Camera (TXD) DX8100 Port Configuration: Select Device (PELCO-D) PELCO-D Protocol Version: 1.001.0001 Interface Mode: RS485 Baud Rate: 2400 Parity: None Data Bits: 8 bits Stop Bits: 1 bits Can anyone help? BOSCH Autodome Setup Manual PELCO DX8100 Stetup Manual Thanks, William Share this post Link to post Share on other sites