SectorSecurity 0 Posted January 18, 2012 So I was at the grocery store the other day, when I happened to look up at the box camera above my head, had been dropped down on what appeared to be a 1/2" conduit pipe from the cieling. However attached to the end of the pipe was a black mount that allowed the box camera to be screwed into it then the mount slips over the end of the poll and is screwed into the poll. (will post a picture I took tomorrow). Does anyone know where I can find these mounts? I have never seen them before and have looked around on the internet but am unable to find them. I do not want a mount to clamps to something like a lamp post, this attaches to the end of the conduit pipe. Any ideas where I can locate these? Share this post Link to post Share on other sites
Fiona 0 Posted January 18, 2012 Without the picture it's difficult to know if we're on the same page but I'm certain companies like Crouse Hinds; Killark; Appleton; Robroy (GRP); and Gedney make what you're describing: a metal terminal box. Something like this - with a cover: Share this post Link to post Share on other sites
Soundy 1 Posted January 18, 2012 He's talking about the camera end of the setup... You could probably use the head off a mount like this: Unbolt/unthread from the mount, thread onto the end of the conduit, or a fitting clamped onto the conduit. The heads are probably available separately too. Share this post Link to post Share on other sites
SectorSecurity 0 Posted January 19, 2012 Yes soundy I am looking for something like that, you have a good idea, never thought about trying that. This is the mount I had seen. Share this post Link to post Share on other sites
