Zohan 1 Posted January 19, 2012 I have ipad demo for analog system but I haven't set up an app logging into a mp cam, 1.3 or above. I need this to do a comparison for a potential client. Does anyone know of one I could access from ipad app? thx Share this post Link to post Share on other sites
Soundy 1 Posted January 19, 2012 Not sure I quite followed that... you want to connect to a remote system that has both analog and IP cams to demonstrate the difference? Share this post Link to post Share on other sites
Zohan 1 Posted January 19, 2012 at the least megapixel cams...doesnt have to have analog too because i can log into a couple others to show analog, but if it did have both at one site would be cool, but im looking for megapixel at the least so i can show the difference Share this post Link to post Share on other sites
SEANHAWG 1 Posted January 19, 2012 It would depend on the system you are trying to connect to. Most DVR's/NVR's/IP Cameras use their own proprietary cell phone app. But you can try an app called IPCamViewer that has support for various brands. Share this post Link to post Share on other sites
tomcctv 190 Posted January 19, 2012 it also depends on the app. and the DVR/NVR you are selling. Share this post Link to post Share on other sites
Zohan 1 Posted January 19, 2012 this is just for general comparison for an appt i have on tuesday..... i really am thinking im going towards aver hybrids...for budget jobs i like how small the nano units are i can hide them in a structured wiring can....i like the rackmount units also....i want to replace my current dvr with one so i can show clients side by side comparison analog or mp. 2 problems right now though 1. TS just informed me mp cams do not look good through their app. ?? 2. sound i think it was you that said the 1116 nano has problems...can u let me in on that, pm me if you feel more comfortable that way... Share this post Link to post Share on other sites
tomcctv 190 Posted January 19, 2012 for aver app http://live.dss.com.tw Share this post Link to post Share on other sites
Zohan 1 Posted January 19, 2012 for aver app http://live.dss.com.tw thanks, already tried that...says 'might take a few minutes to download' but never does just freezes by the way, what was the nano 1116 problems you mentioned in the other thread? thanks Share this post Link to post Share on other sites
SEANHAWG 1 Posted January 19, 2012 If I were to do a comparison, I would bring a laptop to where you can login into dvr and get a bigger view. And you probably have more robust viewing options this way too. Share this post Link to post Share on other sites
tomcctv 190 Posted January 19, 2012 thanks, already tried that...says 'might take a few minutes to download' but never does just freezes sorry i thought you wanted a iphone demo ...... nothing wrong with the link test http://live.dss.com.tw/mobile the nano 16 is just a nano 8 with extra cameras low fps playback Share this post Link to post Share on other sites
Zohan 1 Posted January 19, 2012 If I were to do a comparison, I would bring a laptop to where you can login into dvr and get a bigger view. And you probably have more robust viewing options this way too. i use my ipad Share this post Link to post Share on other sites
Zohan 1 Posted January 19, 2012 thanks, already tried that...says 'might take a few minutes to download' but never does just freezes sorry i thought you wanted a iphone demo ...... nothing wrong with the link test http://live.dss.com.tw/mobile the nano 16 is just a nano 8 with extra cameras low fps playback 7.5 fps is too low for resi? ok, tried it with "/mobile" which wasnt listed before...it connects and works, but kinda crappy...definitely dont like the handyviewer Share this post Link to post Share on other sites
tomcctv 190 Posted January 19, 2012 ok, tried it with "/mobile" which wasnt listed before...it connects and works, but kinda crappy...definitely dont like the handyviewer zohan. you need to load the aver app first for ipad or iphone the ip with mobile at the end is just a static test and has nothing to do with remote viewing. if you load and run the aver app then you will see a big differance. nano 16 @7.5fps is only on single camera display go 4 8 or 16 camera display and you will see the problems Share this post Link to post Share on other sites
Zohan 1 Posted January 19, 2012 ok, tried it with "/mobile" which wasnt listed before...it connects and works, but kinda crappy...definitely dont like the handyviewer zohan. you need to load the aver app first for ipad or iphone the ip with mobile at the end is just a static test and has nothing to do with remote viewing. if you load and run the aver app then you will see a big differance. ok, yes i did that earlier...bad resolution on the images....not a good demo... nano 16 @7.5fps is only on single camera display go 4 8 or 16 camera display and you will see the problems are you saying it's worse than other dvrs at 7.5 fps, or is it worse because most 16 channel dvrs would have more fps, typically a 4 or even 8 channel would have 7.5 /channel and when displaying all channels on screen not a big deal but when displaying 16 channels at once is what causes it to bog down? Share this post Link to post Share on other sites
tomcctv 190 Posted January 19, 2012 its brand new on the market started out as an 8 way. it has the same process power as the 4 and 8 nano which is not enough for it to be 16 way. show 1 screen on playback or even 4 its fine go 8 or 16 then you may as well go make a coffee so as you have something to do while it tries to sort its self out. i have been an aver installer for 8 years and this is the first time i will talk anyone out of using 1. and i will tell you also that aver knows of the problem i think you will see it replaced soon . Share this post Link to post Share on other sites
Zohan 1 Posted January 19, 2012 i appreciate the info.... Share this post Link to post Share on other sites
Zohan 1 Posted January 20, 2012 its brand new on the market started out as an 8 way. it has the same process power as the 4 and 8 nano which is not enough for it to be 16 way. show 1 screen on playback or even 4 its fine go 8 or 16 then you may as well go make a coffee so as you have something to do while it tries to sort its self out. i have been an aver installer for 8 years and this is the first time i will talk anyone out of using 1. and i will tell you also that aver knows of the problem i think you will see it replaced soon . Tom, I just reread this post. So it is not in remote live view where there is a problem, only playback? I could live with that if the unit allows you to choose if you want to run 4 cmera playback instead of 8 or 16? Share this post Link to post Share on other sites
tomcctv 190 Posted January 20, 2012 Tom, I just reread this post. So it is not in remote live view where there is a problem, remote viewing is away from the unit (over network) and you will not get 7.5 fps from the unit (monitor) 4 cameras are fine. but say you install in a gas station and you have a problem and its covered by 5-or 7 cameras. when you hit playback it is slow. the system is fine for home use but not for commercial use Share this post Link to post Share on other sites
Zohan 1 Posted January 20, 2012 Tom, I just reread this post. So it is not in remote live view where there is a problem, remote viewing is away from the unit (over network) and you will not get 7.5 fps from the unit (monitor) 4 cameras are fine. but say you install in a gas station and you have a problem and its covered by 5-or 7 cameras. when you hit playback it is slow. the system is fine for home use but not for commercial use Yes I get all that..I tend to take literal ward is written word for word....you said the word "playback" so I took it to mean there was the problem during playback, not live view, either local or remote Share this post Link to post Share on other sites
tomcctv 190 Posted January 20, 2012 i never mentioned anything about remote viewing. So it is not in remote live view where there is a problem live and remote are two different things. remote will all depend on the network and to which you have the stream set to and it will always be a lower fps thanks, already tried that...says 'might take a few minutes to download' but never does just freezes that message means you have not used the ipad app. you have called up the webviewer. (you cant run that on iphone or pad. Share this post Link to post Share on other sites
Zohan 1 Posted January 20, 2012 i never mentioned anything about remote viewing. So it is not in remote live view where there is a problem live and remote are two different things. This is what you said " from the unit (monitor) 4 cameras are fine. but say you install in a gas station and you have a problem and its covered by 5-or 7 cameras. when you hit playback it is slow " So according to that I took it to mean 'playback' as you said....especially since you said when you have a problem and want to playback....which is recorded video, not live video. Live video can mean on site live viewing or remotely live viewing, the difference in viewing is either live or playback, not onsite/offsite.... thanks, already tried that...says 'might take a few minutes to download' but never does just freezes that message means you have not used the ipad app. you have called up the webviewer. (you cant run that on iphone or pad. so i have the aver iviewer app, are you saying there is more than 1 app? the iviewer app works, but images are ass. I dont know if it's low qual cams or if it's the dvr but I could never use it to show anyone Share this post Link to post Share on other sites
