e173m 0 Posted February 5, 2012 I would like to view the NVR output on any of the 5 TV's in the house. Currently have only Coax running to all TV's with FIOS as my cable provider. Additional cable can be run to most of the TV's but would prefer to modulate over FIOS if it is not too cost prohibative. Can someone point me in the right direction to find the equipment requited to modulate over FIOS which is digital? If I were to run cable what equipment and/or cable would I need? Longest run is 100'. HDMI? HDMI over CAT5? I appreciate all the help! Best, Eli Share this post Link to post Share on other sites
SDM Group 0 Posted February 5, 2012 An easier route might be to go to Video In of the TV's Share this post Link to post Share on other sites
Soundy 1 Posted February 6, 2012 HDMI over Cat5 can get expensive too... haven't just used this in a project, I found that all the "cheap" adapters require two Cat5 cables... the ones that work with single Cat5 tend to be in the $300+ range. Share this post Link to post Share on other sites
thewireguys 3 Posted February 6, 2012 If you have VGA inputs on your TVs you can use this... http://www.tripplite.com/en/products/model.cfm?txtModelID=4876 Share this post Link to post Share on other sites
