Rhea 0 Posted February 19, 2012 How can I set up my DVR start recording "motion detection" with NO delay??? Dahua 1U DVR? Been discovering this just today... 3-5secs delay? Thanx Share this post Link to post Share on other sites
Soundy 1 Posted February 19, 2012 Hmmm, I'd have to look at the DVR to figure out exactly where to find it, but there should be a "pre-buffer" option... Share this post Link to post Share on other sites
Rhea 0 Posted February 19, 2012 THis DVR 'corners" me with that I cannot figure out those -pre&after motion duration recording as far as motion detection goes.. like I said I have another DVR from Enster (China) manufacturer and there it is "black on white" :pre & and post record duration .. no probs,,, but this machine does not make these options clear.. or. maybe . I have to go to "factory reset< leave its settings as they were default and simply activate motion detection recording? Maybe I have messed up something there? Thanx Share this post Link to post Share on other sites
Rhea 0 Posted February 22, 2012 Just came across a tutorial right as my Dahua 1U DVR.. same interface etc... In paragraph about ALARM RECORDING FOUND THIS: STEP 18: Set the Anti-dither time (this is how much time the DVR will delay before STARTING TO RECORD) On mine machine Anti -dihter time is default 5 secs. Any way to go around it na d change to lower value(0-1sec)? This seems a problem been haunting me all the time .. motion recordings star late and stop abruptly... though my after motion recording value is set to 10secs. Any suggestions? Thanx in advance Share this post Link to post Share on other sites
