newguy123 0 Posted February 29, 2012 Hello, ill start by saying im very new to cctv so please bare with me. I installed a CCTV system with 5 cameras. Each Cameras RG6U length is about 800 to 1000 ft. when finished final hook up of the DVR I noticed my pictures arnt very hot at all nothing that was showing up on my little monitor. I read that i may require a amplifier is this true? if so does it go on the camera end or the DVR end? I was thinking about the middle but I rather not have a splice. I would highly appreciate any help at all!! Thank You Very Much. Share this post Link to post Share on other sites
jeromephone 6 Posted March 1, 2012 I think you may have another problem you should see picture over rg6 at that distance. What kind of monitor are you using. Make sure you have the correct inputs. Take a short cable and take the monitor to the camera and see if you get a picture. You want to make sure the camera is putting out a signal Share this post Link to post Share on other sites
newguy123 0 Posted March 1, 2012 when i use a monitor at a short distance i get a perfect picture when i attach it to my long run of cable its fuzzes up about 30 to 40%. oh and i took the full sized monitor and hooked it to the camera with a 12 ft rg6 patch cord perfect picture. thanks btw i appreciate any help at all. Share this post Link to post Share on other sites
Soundy 1 Posted March 1, 2012 800-1000' is pushing it a bit for coax, especially if they're cheap cameras. You may need to go to UTP with baluns. Share this post Link to post Share on other sites
PaulsonLaw 0 Posted March 1, 2012 800-1000' is pushing it a bit for coax, especially if they're cheap cameras. You may need to go to UTP with baluns. ^^^ This, my analog system only recommends up to 180' on coax, 300-400' UTP cat5, 1200' SSTP cat5. Careful on an amp, dont cook the dvr Share this post Link to post Share on other sites
jeromephone 6 Posted March 1, 2012 maybe cat 5/6 baluns with one end and active ie powered ? Share this post Link to post Share on other sites
ak357 0 Posted March 1, 2012 800-1000' is pushing it a bit for coax, especially if they're cheap cameras. You may need to go to UTP with baluns. u saying that cheap camera do not produce 1 volt peak to peak ? should rephrase I guess Why do u think "cheap" camera can't push video far ? Share this post Link to post Share on other sites
newguy123 0 Posted March 2, 2012 hey guys thanks for all the help. the camera im using is http://www.smartvisiondirect.com/index.php?ca_id=221&it_id=1150&query=item it seems to being putting out Frequency Horizontal : 15.734KHz / Vertical : 59.94Hz (NTSC) Horizontal : 15.625KHz / Vertical : 50.00Hz (PAL) S/N (Y signal) More than 52 dB (AGC off) Video Output CVBS : 1.0Vp-p / 75ohm do you think an 8 Ch cat 5/e ballu'ns will work it says it rated for 1000ft will the picture come out good? my next step is to buy that ballum and take a box of cat 5 hook both end to the ballun's and see if it works i'd love more insight thought thanks alot guys!! Share this post Link to post Share on other sites
Soundy 1 Posted March 2, 2012 800-1000' is pushing it a bit for coax, especially if they're cheap cameras. You may need to go to UTP with baluns. u saying that cheap camera do not produce 1 volt peak to peak ? should rephrase I guess Why do u think "cheap" camera can't push video far ? I'm saying they may not handle the extra loading very well. Share this post Link to post Share on other sites
newguy123 0 Posted March 2, 2012 800-1000' is pushing it a bit for coax, especially if they're cheap cameras. You may need to go to UTP with baluns. u saying that cheap camera do not produce 1 volt peak to peak ? should rephrase I guess Why do u think "cheap" camera can't push video far ? I'm saying they may not handle the extra loading very well. what do u mean by loading? Share this post Link to post Share on other sites