bpzle 0 Posted March 3, 2012 Just curious if anyone has any experience with? http://products.boschsecurity.us/en/TAMS/products/bxp/SKU23178327152950760203-CATM85e91996f45b2b2ddee1ad9af8f80bba Using my past experience of analog ptz cams... I spent the afternoon ripping one apart looking for dip switches/ pots to set ID, baud, and what not... haha Share this post Link to post Share on other sites
bpzle 0 Posted March 3, 2012 issue: no longer responding to encoder's ptz commands. protocol, baud, ID set correctly on encoder. using a different MIC 440 it works great using the same encoder... I'm downloading the universal camset program right now to play with to see if I can at least verify communication with the camera. Would be nice if it was just a com setting on the camera itself... I'd rather not send one off if I don't have to. Share this post Link to post Share on other sites
bharath00tp 0 Posted March 19, 2012 I have installed Mic 440 and through camset i can control PTZ protocol is bosch,9600, address is 01.FV is not working.After this i installed vip x1xf encoder through this i can see video but cant control ptz.please advise .After this i have to connect it to media converter then fiber. iam looking forward for your expert solution. Thanyou for your consideration Share this post Link to post Share on other sites
bharath00tp 0 Posted March 21, 2012 waiting for your reply Share this post Link to post Share on other sites
