Jump to content
camera-newbie

How to tell if a CS-mount lens is IR corrected?

Recommended Posts

So, I've got one camera on it's way and it's got a 1/3" CS mount and I was looking at some Fujinon lenses but they don't apparently use the phrase "ir corrected" which I'm assuming I want for an outdoor camera for use in low-light situations (in this case the camera is the 1.3Mp Basler).. I was thinking, for example, of this one which has a decent focal range and has the needed DC iris this camera supports. Is the linked lens an IR corrected lens? Is their "ND filter" feature the give-away here? Please advise.. Thx!

 

Signed -- CS mounted lens newbie

Share this post


Link to post
Share on other sites

IR-corrected lenses will generally say, at the very least, "IR" right on them. Some also go as "day/night" lenses.

 

These are not required for low light... they ARE preferred for true day/night cameras (ie. those with movable IR cut filters).

 

If the camera doesn't state that it's TDN or ICR (or other similar acronym), then you don't need an IR lens.

Share this post


Link to post
Share on other sites

Thanks Matt.. This camera does have the removable cut filter.. so I'll see about finding a lens with IR correction.. I see pricing on these things is all over the map..

 

I did find this document on their site which does list which lenses are day/night so I'll stick with those if I buy a Fujinon lens.. Thx!

Share this post


Link to post
Share on other sites

Turns out there is no Fujinon that does what I want exactly so I looked over at Computar.. They've got two lenses that are both IR rated but one has an f1.3 aperture and the other is f1.8.. I'm thinking I ought to spring for the f1.3 since it will bring in more light.. Correct?

Share this post


Link to post
Share on other sites

The 511 isn't TDN so you don't need an IR lens for it. You SHOULD try to get megapixel lenses for these, though - standard lenses will work, but you won't get the full quality possible with a megapixel cameras.

 

BTW, remember that the 511s don't have auro-iris controls, so those will need manual-iris lenses as well.

Share this post


Link to post
Share on other sites

The iq's are the older (not current model) Sentinel's -- I'm specifically looking at the IQ853 -- unfortunately the specs don't really tell me everything I need to know about the lens -- I'm looking at the 1/2" varifocal IR lenses with CS mount -- unfortunately it does not specify what type of iris it needs -- DC, manual,etc..? Do you know by chance? I'm hoping it's not manual..

Share this post


Link to post
Share on other sites

Yeah, I don't see anything that indicates it supports auto-iris. It is a TDN camera so it will need an IR lens... the 3MP version is a 1/3" sensor though, so you don't HAVE to go to a 1/2" lens (it'll work, but it's not required).

Share this post


Link to post
Share on other sites

Thanks.. From your perspective is there any benefit to, at least in this case, using one over the other? I'll probably pop a note to IQEye (or I guess I could drive down there on Friday and pester them since they're only about 50-60 miles south of me here in So-Cal) and get the answer.. If it turns out I buy a lens with a DC iris but the camera uses a manual iris -- is it safe to assume they can't really be used together since there'd be no way to control the iris outside or jury-rigging a control circuit of some sort..?

 

I just sent a note to one of their guys -- hopefully I'll get an answer..

Edited by Guest

Share this post


Link to post
Share on other sites
If it turns out I buy a lens with a DC iris but the camera uses a manual iris -- is it safe to assume they can't really be used together since there'd be no way to control the iris outside or jury-rigging a control circuit of some sort..?

That is correct.

Share this post


Link to post
Share on other sites

Ok.. Got my reply from Bud at IQeye a little while ago..

 

All of our cameras have manual lenses. We don’t have an auto iris in the house. Thanks for your inquiry.

 

At least I know they respond to emails.. I sent an email to KT&C last week and haven't received any replies yet.. I'm not expecting one either at this point.

Share this post


Link to post
Share on other sites

Good to know.. I've got a note into Pentax CCTV lens people in Denver asking some more lens questions.. The one issue with the small basler's (assuming you're using their recommended Aigis enclosure) is getting a lens that will also fit the enclosure -- some with the DC iris are a little iffy size-wise -- the computar I mentioned earlier may be a fraction of an inch too wide to fit -- I suppose I could try to 'adjust' the case to make it fit but will keep looking.. It's hard to find a IR corrected 2.8-12mm, F1.2 Varifocal DC Iris Megapixel lens apparently.. Many lens places just don't have the combination needed.. If I were in the market for a 5MP capable lens, my choices would be even more restricted unless you ditch the MP need and get a regular lens. Many places go up to 3MP and a few to 5MP from what I've seen..

 

P.S. I was reading the spec sheet for one of the Computer/Ganz lens and noticed the street addresses listed on the bottom -- their California office is located about 5 minutes from my house.. Go figure!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×