IP cam decoder

[sinbad 0]

Hi guys,

I'm in need for couple IP cameras decoders.

 

The cams I'm using in the install are Samsung SNV-XXX

Samsung claims decoder must be theirs. Is this correct?

 

I would think any decoder which's able to connect to the cam should be able to provide output.

[ssmith10pn 0]

I am assuming you want to convert an IP camera to analog?

 

Some of those models have some type of analog output.

[Korgoth Of Barbaria 0]

I am assuming you want to convert an IP camera to analog?

 

Some of those models have some type of analog output.

 

This.

 

Also, in most cases you have to use decorder same brand as camera :/

[pavel1883 0]

http://www.geovision.com.tw/english/Prod_GVIPDecoderBox.asp

 

IR remote control comming with it.

here is decoder to vga or hdmi. Please find there supported list of ip cameras. does your cam there?

[sinbad 0]

thats interesting. thanks for the link.

I wonder if it lets me output each channel on its own.

We need to send some outputs for the monitoring company through OZvision boxes.

[fa chris 0]

Your NVR should be able to output analog signals for monitors, or have some type of encoder for them. Might be easiest to go this route, passing the signal from the NVR instead of direct from the camera to the monitoring company.