White Fox 0 Posted September 10, 2005 We install systems in industry, monitoring a high speed process. Capturing and processing the images is no problem, we also display images from each camera using real time quads which work great, however we have experimented with a 16-in - 2-out Bosch mux, with 12 cameras connected, set to display 4 and 4 on each monitor, the update rate drops from PAL 50 fps to something like 4 fps. in our application this is useless. Is this normal when using mux's. What we would like to do is use one 40" lcd monitor to display the 12 cameras in a "real-time" view, I guess 25 fps would be the minimum. Any ideas WF Share this post Link to post Share on other sites
Sir Flannel 0 Posted September 11, 2005 Yes, that's normal for a multiplexer. It shows you a digitized image when displaying in multi screen mode. I don't know of any soultion for the video output other than 1) the old analog quads, and 2) one for one monitor/camera ratio. Share this post Link to post Share on other sites
White Fox 0 Posted September 11, 2005 Matrix? Rory - I am not familiar with matrix, I checked out the geindustrial.com site about matrix, only overview info available, I have sent them an enquiry. Have you used them? do you think it will do what I want? WF Share this post Link to post Share on other sites
