hendra15 0 Posted April 9, 2012 hello, i want to ask... i have KPD674 with hdd 500gb in dvr. if my dvr is turn off and turn on again always ask to scan disk, and if i pick yes it take a hour to scan disk... can anyone tell me how to solve this problem? thanks.... Share this post Link to post Share on other sites
coolie11 0 Posted April 11, 2012 Looks like a bad or corrupted HDD. 1. Test the hard drive with a diagnostic utility downloaded from the drive mftr.'s website or use Seagate's SeaTools For DOS. You will create a bootable CD with the file you download. You will need third-party burning software to do this such as Roxio, Nero, or the free ImgBurn. Burn as an image, not as data. http://www.seagate.com/www/en-us/support/downloads/seatools/seatooldreg Boot with the CD you made and do a thorough test of the drive. If it fails any physical tests, replace it. 2. If the hard drive tests good, then seethis notice by microsoft: [Q316506] -http://support.microsoft.com/?kbid=316506 Be proactive and make sure you have backed up your data because the drive may be on its way out. Share this post Link to post Share on other sites
tomcctv 190 Posted April 11, 2012 if my dvr is turn off and turn on again always ask to scan disk, hi if you are seeing this on a avtech ........ then 9 out of 10 its the internal battery Share this post Link to post Share on other sites
