markfix 0 Posted May 3, 2012 Hi, I am using a Axis Q1755 camera to drive a pan/tilt via RS485. Six products work fine. The problem: with two Q1755 pan/tilt move in the wrong direction (both pan and tilt) Pan/tilt works fine with other Q1755 (or RS485 direct-wired with keyboard control). Problem is camera setup I have tried Q1755 PTZ flip setup (check "flip pan" and "flip tilt" to change direction). Direction don't change! Does anyone have any experince with Q1755 to drive a pan/tilt ? Any input would be greatly appreciated. Share this post Link to post Share on other sites
Soundy 1 Posted May 4, 2012 The problem: with two Q1755 pan/tilt move in the wrong direction (both pan and tilt) Try reversing the wires? (Just kidding, that won't work...) Share this post Link to post Share on other sites
markfix 0 Posted May 7, 2012 Resolved Strange problem. Flip setup: I have clicked save, without modifications. It works!!! The customer has tested these two cameras: bad settings!!!! Many thanks Share this post Link to post Share on other sites
