needabandaide 0 Posted May 24, 2012 Hey guys. my 5 year old computer running a geovision GV1480 broke down about 2-3 months ago. i finally got around to rebuilding a new machine to host the card last week but when i boot up the software. I'm showing "video lost" in all 16 cameras. is that a card problem? or wire problem? or software problem? i updated the software to 8.5 with the updated driver but I'm still experiencing the same issue. i Also try reinstalling the card to different PCI slots but I'm getting the same result. Below are the system specs AMD Phenom 9600 X4 processor Asus M3A motherboard 1GB DDR2 PC6400 Ram 500GB hard drive Windows XP SP3 the cameras are 16 wired analog cameras. Any help would be greatly appreciated! thank you! Share this post Link to post Share on other sites
HDSecurityStore 0 Posted June 13, 2012 Check the power. Does the IR light up if you cover the light sensor? Share this post Link to post Share on other sites
sinbad 0 Posted June 13, 2012 did you remeber to connect to power to the molex connector on the DVR card? not a must that you will have one on 5 years old card though.. Share this post Link to post Share on other sites
