Gesualdo 0 Posted June 3, 2012 I need the photocell for a Bosch/ extreme EX82 camera. I have had no response from Bosch other than to contact the seller and don't want to send it back to them without any idea, 1- if it will be repaired or 2- how much to unplug the old sensor and replace with a new one ( which I can do myself if I can get the part). Dealer is out of business. Does anyone have or can get me the part I need? gesualdo Share this post Link to post Share on other sites
ak357 0 Posted June 3, 2012 I need the photocell for a Bosch/ extreme EX82 camera. I have had no response from Bosch other than to contact the seller and don't want to send it back to them without any idea, 1- if it will be repaired or 2- how much to unplug the old sensor and replace with a new one ( which I can do myself if I can get the part). Dealer is out of business. Does anyone have or can get me the part I need? gesualdo Hmm, I would try to do my self too see if u can get any broken IR bullet take out photocell solder back to Bosch sure photocell can have different value or may be u need photo-transistor but worth to try Share this post Link to post Share on other sites
Soundy 1 Posted June 4, 2012 It probably uses a standard CDS (cadmium sulfide) photo-resistor... the catch is, there are several values available, and for it to work properly, you'll need to replace it with one of the same or very similar value. They're pretty readily available from commercial electronic component stores, like this: http://www.rpelectronics.com/electronic-components-parts/resistors-potentiometers/light-dependent-resistor Share this post Link to post Share on other sites
Gesualdo 0 Posted June 4, 2012 Ok, Cool, If someone could tell me the right values to get to solder one in, or preferably can get the part from bosch (Authorized repair or dealer, even unauthorized) with the pigtail already attached, or has one around that would fit and can send it to me I would really appreciate it. Compensated of course. Saw some at RS but don't know what to get. Thanks, Gesualdo Share this post Link to post Share on other sites
sinbad 0 Posted June 11, 2012 I would send it to bosch have them fix it properly. anyway my guess is you going to transfer cost to client. too fancy cam to fuck it up worse. Share this post Link to post Share on other sites