NEED HELP ASAP WITH CNM CCTV SYSTEM

[cctvhelp 0]

Hi

 

i was trying to reset cnm dvr 160gb to factory settings by taking out the cmos

i reformated the harddrive and now the system wont recognize the harddrive

also get an rebooting error

 

hope someone could help me realy quickly need this sorted

 

 

thanks

[tomcctv 190]

hi. most of the time with a cnm is the format type. does your dvr startup as normal without hard drive attached ?

[cctvhelp 0]

Hi Tom

 

It takes some time

Slower then before I reset everything

When I try to record I get a message saying no hard drive

[tomcctv 190]

hi. now set your dvr time and date shut down then reconnect your HD restart go to settings then format and see if that works.

[cctvhelp 0]

Hi

 

After formatting it takes along time to load

But it worked fine with the hd disconnected

[cctvhelp 0]

For some reason the system does not regnonise the hd

[tomcctv 190]

hi. when you formatted the drive did you do it on the dvr or PC

[cctvhelp 0]

Iv had this problem sinse taking the CMOS battery in and out

And putting the 2 swicthes on and off on the board

[cctvhelp 0]

hi. when you formatted the drive did you do it on the dvr or PC

 

 

I did it on the dvr

After resetting the system

It had a option to format on start up so I clicked on it

When I put on the system without the hd it works fine as

It doesn't reboot itself or anything

 

At start up it shows Omb

Edited June 6, 2012 by Guest

[cctvhelp 0]

Could anyone help please