mjc_sticks 0 Posted June 20, 2012 Received the following error while signing in remotely to DVR: Due to DVR busy or network failure, login failed. Successful ping to ip address and nothing (that I know of) has changed. Error just appeared out of no where. 16 CH DVR - Gen IV Technologies - TI Mfg Any thoughts what to check? Share this post Link to post Share on other sites
groovyman 0 Posted June 20, 2012 Maybe try rebooting the dvr. See if that helps. I've run into an issue like this with every dvr I've ever used and rebooting usually fixes it. Share this post Link to post Share on other sites
mjc_sticks 0 Posted June 20, 2012 Struck out - Tried it more than once, still no success. Share this post Link to post Share on other sites
tomcctv 190 Posted June 20, 2012 Struck out - Tried it more than once, still no success. hi remove your remote viewer from pc and reload it again (your unit will also run on dahuas PSS remote software) Share this post Link to post Share on other sites
HDSecurityStore 0 Posted June 22, 2012 If its on IE try hitting the compatibility view/mode button Share this post Link to post Share on other sites
