Roger Smith 0 Posted June 22, 2012 I have been recently been posting about a Pelco PTZ camera I have because the PCB board went bad. I was just thinking about this cool software that I found that helped me access the cameras OSD. I don't have an actual PTZ joystick, so I used this http://www.serialporttool.com/PTZ.htm It even allows you to program a tour for a cheap camera you can get off of ebay that is very limited. It cost about 60 dollars, but is well worth it. All you need is a RS485 or a converter, and you can use any computer as a PTZ joystick. I have mine on a flash drive. Share this post Link to post Share on other sites
Roger Smith 0 Posted June 23, 2012 A video I found of it. Can anyone tell me how to embed the video??? Share this post Link to post Share on other sites
Soundy 1 Posted June 23, 2012 I've been using PTZ Controller for years - it's handy to have on my laptop for testing PTZs up-close. It's been mentioned here many times. Share this post Link to post Share on other sites
