kifaru 0 Posted June 24, 2012 I would like my NVR (Dahua NVR 16) to notify me when the cameras detect motion. Two IP cameras will be mounted in the front & another 2 in the back of the house. I would like to use 2 LEDs or lights, say 1 green to represent the front 2 cameras & 1 red LED for cameras in the back. I would like either the red or green LED/light to light up when either the front or the back set of cameras detected motion. Is this possible? Share this post Link to post Share on other sites
Soundy 1 Posted June 24, 2012 Sure - you could use the alarm outputs to trigger the LED driver circuits. You could even have a separate LED for each camera. Share this post Link to post Share on other sites
CleoGerten 0 Posted November 13, 2012 If you are commenting on my images, they were taken about 5 minutes apart, both at night. ______________________ http://www.ledstrips8.com/outdoor-led-lighting-c-11.html http://www.LEDlightssell.com/LED-spotlight-c-231.html http://www.ledlightsworld.com/led-strips-flexible-led-strips-c-1_49.html Share this post Link to post Share on other sites
