nadajoey 0 Posted July 5, 2012 Hello, i have one camera that is hard wired to one of my TV;s. I would like to send this feed to 2 additional TV's in my house. i am guessing i would need to first split this signal, then send wireless with sender/receiver. but i am wondering if there is an easier way? modulator may not work as i have 2 separate satelite antennas feeding my 3 TV's... so not all on the same cable feed. any suggestions on getting this done? thanks Share this post Link to post Share on other sites
Rockvilleash1976 0 Posted July 7, 2012 You can use something like this. it depends on what camera you are using and what connectors you have. if it is a BNC just google T spliter and BNC to RCA. you can find the parts at your local Radio Shck to connect the camera to the RF system. http://www.amazon.com/Terk-Technologies-Leapfrog-LF-30S-Distribution/dp/B00009UHXR Share this post Link to post Share on other sites