aof21 0 Posted July 17, 2012 Hi, I am new here, I apologize in advance if my post is not in the right subforum or if my questions are too naive. Here's what I would like to do: Install Axis P5544 PTZ using existing network cabling Use something (hardware / software) to get the real-time feed of this camera and convert it to HDMI or HD/SDI to bring this into a video switcher. Can someone tell me what product(s) would allow me to do this sort of thing? Share this post Link to post Share on other sites
thewireguys 3 Posted July 17, 2012 Why not just use a HD-SDI PTZ camera? Share this post Link to post Share on other sites
aof21 0 Posted July 17, 2012 yeah, that will likely be the other way I have to go. I wanted to pursue this option thought because my understanding is that I'd need to run coax cable if I want to go the HD-SDI route, whereas, I already have the network cable runs in place. Its probably about 30-50 meters (I need to check) from where the camera will be located to where I want the video output to be. Share this post Link to post Share on other sites
aof21 0 Posted July 17, 2012 I found this.... Vaddio WallVIEW CCU HD-19 HD-SDI PTZ Camera with QuickConnect CCU. Looks like I'd still need to run a HD SDI cable, but I'd have the remote 360 pan over ethernet. Share this post Link to post Share on other sites
