andrewgroup 0 Posted July 18, 2012 We have been asked to create a solution to move a PTZ motor to 1 of many (6 to 10) preset locations based on recieving a contact closure from detection devices. MORE info.. We have a property (football field) with items on interest spread about the lots. We can easily detect folks walking about, in a given zone with both motion and PIR detectors, and we can wirelessly recieved activity from any of the detectors. the reciever will close 1 of many contacts, and we would like to take that contact closure and feed that into a PTZ controller or sorts and direct a PTZ motor that has narrow beam bright light the area on the lot indicated by the motion/pir detectors. With success we have a big opportunity to place more of these in service. We are researching the KTD-415 GE Security KTD-415 Preset Alarm Interface Module, 16 Alarm Contact Inputs to determine if it may work. we'd prefer not to install a joystick controller box, no cameras, "yet" this is a deterent system only. Any thoughts are appreciated. Cheers Andrew Share this post Link to post Share on other sites
