Bear 0 Posted July 21, 2012 i have taken over a new shop there is a complete cctv system set up that i believe was able to be accessed remotely. How can i find the address to log into the system. please Share this post Link to post Share on other sites
vector18 1 Posted July 21, 2012 Hello Bear, welcome to cctvforum.com. Please look at the DVR and see if you can figure out a make and model. Does your shop have active internet? Is there a cable connected from your DVR to your modem/router? Share this post Link to post Share on other sites
Bear 0 Posted July 26, 2012 thanks for reply sorry for delay. i have realised the internet line is disconnected so that is the first thing i will have to do I guess. the brand is a NEO Share this post Link to post Share on other sites
TipoFloe 0 Posted July 26, 2012 thanks for reply sorry for delay. i have realized the internet line is disconnected so that is the first thing i will have to do I guess. the brand is a NEO Regardless of brand and model, there are several ways you can look up the DVR's IP address: 1. Access the menu and find the network information. Here you should see DVR's IP address and the ports that it needs to have opened. You need to also find the DDNS lookup information if the DVR uses DDNS server. 2. Access the router and verify the DVR's IP address. You can also verify which ports have been forwarded. 3. www.whatismyip.com and then find out what your IP is, or use the DDNS connection information to connect to the DVR. Good luck! Share this post Link to post Share on other sites
