Jump to content
griffonsystems

vibration in an industrial install

Recommended Posts

has anyone had to deal with vibration or movement on a building, or where a camera will be mounted? are there bushings, mounts, etc that deal with this issues at all?

Share this post


Link to post
Share on other sites

In the past I've had to mount a range of cameras on industrial process machinery with both high and low frequency vibrations (also 3 > 5G impacts on some).

 

You could make up a clamp "sandwich" with a 1- 2" thick piece of high density polyethelyne between the mounting bracket and the vibrating surface. If the camera is fitted into a weatherproof housing, the addition of a further piece of HDPE or similar (perhaps LDPE) between the camera and the support plate will further damp out some of the vibration.

 

As no two situations are ever quite the same, you will need to experiment a bit to see what works best for you.

Share this post


Link to post
Share on other sites

griffonsystems,

 

If you begin to feel sick whilst watching the monitor, it's a fair bet the anti vibration technique isn't working properly

 

Hope it goes o.k. and keep us posted,

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×