psi 0 Posted September 6, 2012 I really need some advise one this! I have to implement a wireless camera system and would like some advise on the type of camera and exactly how i would go about setting this up. I need cameras that can transmit about 1000ft signal. Or Can i setup up wireless cameras connect them to a router and then connect the router to another router so that i can transmit signal at a longer range? I need about 30 cameras... and the area is about a square mile. Please some help would rele be appreciated. Share this post Link to post Share on other sites
GrouchoBoucho 0 Posted September 6, 2012 you need to hire a professional who's experienced with this stuff, or you'll end up dumping a ton of money into something that won't work properly. Share this post Link to post Share on other sites
psi 0 Posted September 7, 2012 what about if i connect the wireless cameras to a router and the install some network extenders to bounce the signals to another router... would that work? Share this post Link to post Share on other sites
matjaz 0 Posted September 9, 2012 agree with GrouchoBoucho .... if we forget signal strenght ( in EU is limited) and weather facts ....think about bandwidth - 30 x 800 kb its really hard to set up .. i didnt see any reliable wireless setup at that magnitude ... i dont say its not possibille but it will be tricy ... i am interested on other member inputs on this ... Share this post Link to post Share on other sites
matjaz 0 Posted September 9, 2012 what about if i connect the wireless cameras to a router and the install some network extenders to bounce the signals to another router... would that work? you can use WDS, which stands for Wireless Distribution System, is a feature that enables single-radio APs to be wirelessly inconnected instead of using a wired Ethernet connection. Many ruters support this, and for cheaper ones there is WRT firmware. But i am not sure if this will work for that scale of install (bandwidht) Share this post Link to post Share on other sites
thewireguys 3 Posted September 9, 2012 A wireless system will have no issues with 30mbps IF you know how to design it properly and use the right gear. This a not a project you should take on for your first wireless project unless you wanna burn though all of time and money to get everything working. Share this post Link to post Share on other sites