snoopy 0 Posted October 17, 2005 Hi, Im running a DVR system with the KMC 4400r card and 4.10 software, and i notice that my cameras show very blurry especially with sunlight, even though i have auto iris cameras, and its very very pixelly but the cameras are suppose to be a high resolution, they look good on other systems i have seen but not on mine (other system were using a different dvr card) i was just wondering if thats a software issue or hardware. Also, does anyone know where i can find an update for the Diginet Site 4.12 ??? Share this post Link to post Share on other sites
snoopy 0 Posted October 17, 2005 oh by the way the specs are: P4 2.4 256mb ABIT mb intel chipset (also same problem i had on an asus) ATI Radeon 9250 200gb hdd cdrw running windows xp. Share this post Link to post Share on other sites
rory 0 Posted October 17, 2005 What cameras are they, and have you tested the cameras on a CCTV Monitor, or at least a TV, to make sure they are working and focused properly? Rory Share this post Link to post Share on other sites
snoopy 0 Posted October 17, 2005 The cameras are from china, their focused and i did view it thru a portable tv monitor, but like i say the picture is horrible, very very pixelly and the playback is even worse but the worst part is the camera i have in a corner of the office pointing at the counter, you cannot see anyones face or anything beyond the counter and entrance its completely saturated and that camera i have an auto iris varifocal lens on. Share this post Link to post Share on other sites
snoopy 0 Posted October 17, 2005 also, those cameras have been tested on other screens and dvrs and they work just fine, but like i said i have a couple of systems and they look like that on all of my locations, and i even adjusted the little gold knob on the card itself which makes the pictures brighter or darker. snoop Share this post Link to post Share on other sites
cctv_down_under 0 Posted October 17, 2005 Be carefull that knob was not a Gain Control? Are you using a LCD screen, just sounds like a crappy card to me! Share this post Link to post Share on other sites
snoopy 0 Posted October 17, 2005 i think it was a gain control, it adjusts darkness and brightness, but the gain is fine. It may just be a crappy card, but i have crappy cards at multiple locations. I was wondering if maybe updating the diginet software from 4.10 to 4.12 might makea difference. Share this post Link to post Share on other sites
snoopy 0 Posted October 17, 2005 and i am using beautiful lcd monitors, definitely not the monitor. Share this post Link to post Share on other sites
loop 0 Posted October 17, 2005 If I remember right on the Kodicom card you have a blue plastic cube with a screw on it's side. It's a potentiometer for electrically adjusting the capture sensitivity. Try playing with this screw while watching the video and see if it solves your problem. Be careful with screw driver... Share this post Link to post Share on other sites
rory 0 Posted October 17, 2005 chinese cameras ... Hmmmmmmmm. Share this post Link to post Share on other sites
snoopy 0 Posted October 18, 2005 lol ya china man crafted cameras, but the whole thing is they look good on another dvr card, how come not on the kodicom diginet program ??? I would be interested in getting the updated software v4.12 is it ??? can someone tell me how i can go about getting this ? Share this post Link to post Share on other sites
clyde 0 Posted November 6, 2005 Hi, PM me if you still need sotware i have 4.13 p8 Share this post Link to post Share on other sites
