ic1nyc 0 Posted September 14, 2012 Hi all. A few times a year I get service calls from SOHO users/owners of various CCTV systems. Issues are mostly net connectivity problems and the occasional drive failures. I've also installed a few over the years; all were China-sourced systems fitting the tiny budgets I had to work with. I've also built some PC-based systems based on Kodicom cards. With the exception of PC-based systems, I found issues with all of the units I've encountered (eg: IE only browser support; crappy GUIs; badly placed OSDs that can't be removed; no vendor or OEM names on units to help track down support, etc) Now, keeping the above in mind, I am seeking advice for a standalone 16ch DVR with at least the following specs: -Full D1 recording across ALL 16 channels -Must be able to SIMULTANEOUSLY display to HDMI & VGA or BNC displays -Support at least 2TB storage (client doesn't care about an optical device but it would be nice if unit can accommodate one) -Good client software -IOS and Android support -Ideally muilti-OS support, but MUST support MS XP AND higher -Preferably not IE-only browser support, but if IE only, then at least IE7 to IE9 -US-based for any support or return issues Any unit recommendations with pricing and reputable vendors will be greatly appreciated. I am located in NYC. TIA Share this post Link to post Share on other sites
skomo 0 Posted September 14, 2012 i know its not a standalone system, but you could always look at Avigilon system using 4 encoders... I'm sure some of the yankees in the forum might be able to contact you with regards to pricing etc... Share this post Link to post Share on other sites
ak357 0 Posted September 14, 2012 i know its not a standalone system, but you could always look at Avigilon system using 4 encoders...I'm sure some of the yankees in the forum might be able to contact you with regards to pricing etc... +1 for Avigilon Share this post Link to post Share on other sites
GrouchoBoucho 0 Posted September 14, 2012 what would the cost be for four avigilon encoders plus software plus suitable pc? standalone 16ch x d1@30fps dahua can be had for $550+hdd Share this post Link to post Share on other sites
jakesoundels 0 Posted September 14, 2012 You said you've worked with budget dvrs in the past but what is the budget(s) now? If its on the low end you can't go wrong with the dahua. Share this post Link to post Share on other sites
ic1nyc 0 Posted September 14, 2012 Thanks all for the responses. Right now I cannot use/respond via PM. Unit will have to be standalone, not PC-based system. From some reading here, looks like Dahua (Qvis, et al) seems to be preferred choice. Any specific model recommendations? Budget $1200 (inc. cameras!!!) Right now I cannot use/respond via PM, who is OEM for Dahua ESDV-FULLD1-16? Any comments on this unit? Share this post Link to post Share on other sites
GrouchoBoucho 0 Posted September 14, 2012 Budget $1200 (inc. cameras!!!) Right now I cannot use/respond via PM, who is OEM for Dahua ESDV-FULLD1-16? Any comments on this unit? i think you answered your own question there how many cameras does that budget include? i wouldn't recommend spending under $100 per camera; $150-$200 is preferable, otherwise you might as well just go back to the crappy costco package system. Share this post Link to post Share on other sites
thewireguys 3 Posted September 14, 2012 16 cameras plus a 16 channel DVR and you want better GUI and features..... wow this blows my mind Share this post Link to post Share on other sites
ic1nyc 0 Posted September 14, 2012 16 cameras plus a 16 channel DVR and you want better GUI and features..... wow this blows my mind 9 cameras to be installed. Share this post Link to post Share on other sites
ic1nyc 0 Posted September 15, 2012 No one had any model recommendations based upon my needs? Share this post Link to post Share on other sites
thewireguys 3 Posted September 15, 2012 http://www.costco.com/Common/Category.aspx?cat=93304&eCat=BC|90607|4802|93304&whse=BC&topnav=&hierPath=90607*4802*93304*&lang=en-US Share this post Link to post Share on other sites
tomcctv 190 Posted September 15, 2012 Hi. I would also take a look at avermedia not in the budget range of the dahua but all are hybrid. And if you are looking to sell as installed systems .......your not going to have the problems of your customers finding the trade price . Share this post Link to post Share on other sites
ak357 0 Posted September 15, 2012 (edited) http://www.costco.com/Common/Category.aspx?cat=93304&eCat=BC|90607|4802|93304&whse=BC&topnav=&hierPath=90607*4802*93304*&lang=en-US way too expensive for him Edited September 15, 2012 by Guest Share this post Link to post Share on other sites
ic1nyc 0 Posted September 15, 2012 http://www.costco.com/Common/Category.aspx?cat=93304&eCat=BC|90607|4802|93304&whse=BC&topnav=&hierPath=90607*4802*93304*&lang=en-US I'd prefer not to shop @ Costco. Share this post Link to post Share on other sites
ic1nyc 0 Posted September 15, 2012 Hi. I would also take a look at avermedia not in the budget range of the dahua but all are hybrid. And if you are looking to sell as installed systems .......your not going to have the problems of your customers finding the trade price . Any specific Avermedia models? Share this post Link to post Share on other sites
ic1nyc 0 Posted September 17, 2012 Well, awaiting delivery of a 2TB QVIS Shangri-La; going to use a Westinghouse 19" LCD. Need some input on cameras though. Considering using all SV368ZE (2.8-12mm manual varifocal, 700TVL). Anyone has any experience with these units? Share this post Link to post Share on other sites
tomcctv 190 Posted September 17, 2012 can i ask why you have gone for a budget unit ........Looking for a DVR with at least the following.. please dont think its anything like a dahua ......... also no free apps (you have to pay for app on every device) Share this post Link to post Share on other sites
ic1nyc 0 Posted September 17, 2012 It's supports full d1; can feed two display simultaneously and fits' the budget since cameras are going to eat up most of it. This thread (viewtopic.php?f=3&t=26873) further my decision. Share this post Link to post Share on other sites
tomcctv 190 Posted September 17, 2012 It's supports full d1; can feed two display simultaneously and fits' the budget since cameras are going to eat up most of it. This thread (viewtopic.php?f=3&t=26873) further my decision. please dont go by that thread it has nothing to do with your dvr............ not the same unit Share this post Link to post Share on other sites
Kawboy12R 0 Posted September 18, 2012 Tom, I guess I'm confused now too. I think we all know that it's not the exact same unit in that previous thread but the general consensus seems to be that Qvis DVRs are re-branded Dahua DVRs, right? The one he picked out seems to me to have decent specs for the price and should run the free Dahua software, right? If not, then what specifically is wrong with what he and I understand about what he picked out for a DVR? Share this post Link to post Share on other sites
tomcctv 190 Posted September 18, 2012 hi. It is not a dauha. If the sales man says it is then ask to talk to another. The shang is a 16 way $200 unit and will not work with ANY dauha software or APP and its also new to the market Share this post Link to post Share on other sites
ic1nyc 0 Posted September 19, 2012 Well awaiting delivery and still haven't acquired cameras yet. Share this post Link to post Share on other sites
ic1nyc 0 Posted September 21, 2012 Unit arrived today; tested without any video input and so far so good. Clean interface and intuitive setup. Share this post Link to post Share on other sites
ic1nyc 0 Posted October 3, 2012 Well, installed unit today; can't recommend product. Power supply doesn't fit flush to unit and easily slips, . For remote viewing, quicktime plug-in loads but no video display, just the QT logo. Currently trying to find solution. Share this post Link to post Share on other sites
tomcctv 190 Posted October 4, 2012 For remote viewing, quicktime plug-in loads but no video display remote viewing on what ??? you dont neet any quicktime plug-in. which software are you using and which apps Share this post Link to post Share on other sites
