vincenttor 0 Posted September 15, 2012 My question is, Is it possible to let the TV switch to let's say your AV channel if there is a motion detection or alert ? I have thought of a few ideas: I am using a Dahua VEC8016HB card, and Linovision software. This supports I/O controllers wich i have ordered. I got 8 input chans and 8 output chans. when there is a alert i would like to let the i/o device switch the television in the living room if its already on to the AV channel so i can see the cams on screen. It is a Samsung Led tv UEA something not sure about the type. If there is a movement alarm or something/one walks trough the PIR beams it turns a relay on that presses a button on a learning remote control. The one you can use on multiple devices and can make your own programs with. I thought to learn it and set under a key so the relay presses the key and it turns on the wanted channel. This is all nice but its messy. I am not the only one with this idea i think, and is there something that does this out of the box. Or do you need a special TV for it, do i need to contact samsung for something like this ? Any body ? hope this is not to messy and a bit understandable what i mean. Thanks Vincent Share this post Link to post Share on other sites
Neutech 0 Posted September 16, 2012 On the Scart socket of every TV there is a "switch" pin to turn to AV http://www.leadsdirect.co.uk/technical/scartwiring.html Thats the diagram so just a mater of hooking up to EXT PIR or a detector or using the relays on your I/O card but that would mean every movement it would switch the TV to AV Share this post Link to post Share on other sites
vincenttor 0 Posted September 16, 2012 Thanks allot Neutech, that is what i am looking for. You are right about that indeed, maybe i will only make it turn to AV when the doorbel is pressed on the gate. That makes it less irritating i guess. Super " title="Applause" /> makes me happy Share this post Link to post Share on other sites
ljarrald 0 Posted September 18, 2012 there is indeed. W-dnn60lfAQ i put a thread on here somewhere with a diagram and stuff. but i can't find it. Share this post Link to post Share on other sites
vincenttor 0 Posted September 22, 2012 Yes that looks great ! Thanks for the vid Share this post Link to post Share on other sites