jay2005 0 Posted October 18, 2005 what if i need more than 16 cameras? how can i stream two server in a single router? please help tnx in advance system: kodicom Share this post Link to post Share on other sites
rory 0 Posted October 18, 2005 I dont know Kodicom, but normally with other DVRs you just set a seperate internal IP for each DVR, change the port in the DVRs so that they are different, then port forward to each DVR in the routers applications and servers section. Share this post Link to post Share on other sites
cctv_down_under 0 Posted October 18, 2005 Yes so DVR 1 is: 210.244.168.12 (operating on port 80) (I bet someone will be stupid enough to try to connect to that) and DVR 2 would be 210.244.168.12:81 (operating on port 81) Share this post Link to post Share on other sites
Gotta Stop 0 Posted October 20, 2005 The center software will only allow for one port address. Changing the port in the center software requires a reboot of the computer. With that in mind you can connect 1 server with the center software and one with the web server. The new center software will allow up to 32 cams but you must connect to multiple servers and they have to have the same ports open, so they will have to be in back of different routers with different ip's. Share this post Link to post Share on other sites
jay2005 0 Posted October 24, 2005 im not yet aware about this 32 channel client software for kodicom, do you have a link for free download thank you in advance a link for a review will also be appreciated Share this post Link to post Share on other sites
GSF 0 Posted October 28, 2005 this is sound interesting,. so far i have connecting 2 remote site with 2 cameras each. i am using the center software to connect the 2 site, i can view 4 cameras in total now, but the retails shop is still in expending they cctv system very soon, i will going to connect more than 20 site, this add up to about 40 cameras in total. now concern....is the kodicom center software able to connect all the 20 site remote dvr? and will it able to view more than 40 cameras in one Monitor screen? big concern..... anyone here experinece before to use the CENTER software to connect more than 20 remotr dvr system? with more than 32 cameras? or it is limited to only 16 cameras ? Problem ! have to solve to make practical retail shop remote surveillance. thanks Share this post Link to post Share on other sites
