Peter_ 2 Posted September 17, 2012 I attached a drawing of my current network arrangement. Inside Mobotix Control Center I'm using ~15500 kilobits/second (1.94 MB/sec) but the frame rates for the cameras - especially the Mobotix cameras are not great (~1/2 fps for the d12 at 1280x960 and 6fps for the M12 during the day). Does this setup look alright? I record the two non-Mobotix cameras to the NAS at ~10-15fps each. Is the second router necessary? I didn't want to slow down other computers and devices attached to the same router as the cameras (that was my thought at least). Share this post Link to post Share on other sites
GrouchoBoucho 0 Posted September 17, 2012 how are the two routers connected - wan/lan ports? where does the internet connection come in? normally i'd just plug everything into the switch and then use the router strictly for the internet connection. Share this post Link to post Share on other sites
ak357 0 Posted September 17, 2012 don't need second router put 2 Nic in comp one for camera subnet second for WAN/internet Share this post Link to post Share on other sites
Peter_ 2 Posted September 17, 2012 Thanks for the tips everyone. So plugging in all the cameras into one router (for all my home computers and stuff) won't slow everything down? Share this post Link to post Share on other sites
