constantwatch 0 Posted October 2, 2012 hi guys please help i have recently installed a 4camera system with dvr at my house , have worked out how to open required ports i have my dvr address in dmz, but cannot reach the dvr remotly, what am i not doing correctly, any advice would be greatly apprieciated thanx Share this post Link to post Share on other sites
jakesoundels 0 Posted October 2, 2012 Popular subject today. It is also well covered on this forum. http://www.cctvforum.com/viewtopic.php?f=34&t=32563 Share this post Link to post Share on other sites
BestPriceCctv 0 Posted October 3, 2012 What kind of dvr is it What browser are you using What operating system Did you set ip in dvr Did you test the port is open Share this post Link to post Share on other sites
constantwatch 0 Posted October 4, 2012 What kind of dvr is itWhat browser are you using What operating system Did you set ip in dvr Did you test the port is open ok dvr model r9508s h.264 using ie browser using gdmss lite , and iapollo operating system ip is set in dvr i can view on internal ip ports have been confirmed open via canuseeme and portforwarding Share this post Link to post Share on other sites
constantwatch 0 Posted October 4, 2012 What kind of dvr is itWhat browser are you using What operating system Did you set ip in dvr Did you test the port is open just been thinking ,,, when you said "did you set ip in dvr. ,,,, please explain exactly what you mean please Share this post Link to post Share on other sites
constantwatch 0 Posted October 6, 2012 finally i got it sust! i found out the reccomended remote viewing software which for me is MEYE and happy days it working fine thanx for suggestions Share this post Link to post Share on other sites
