RSWorld 0 Posted October 3, 2012 Hi I am trying to set up a RS485 Contoller to work with my Samsung spc-100 keyboard. On my Panasonic WVCS574 I snipped the rs485 cable and have the following 5 cables: RED, YELLOW, ORANGE AND GREEN with a brown earth. I have tried numerous ways to get it to work and the cameras dip switches are in a 4 way communication, 1 cctv camera end of line set up, 9600 and is set to id: 01. On the keyboard every time I try and turn the joystick TX flashes on the keyboard. I just want someone to help me and tell me where the coloured wires should go to on the back of the keyboard? ON PANASONIC CCTV: Data Transmission: Red: T (B) Orange: T (A) Data reception: Yellow: R (B) Green: R (A) SAMSUNG SPC-1010 PTZ KEYBOARD Tx1: - + Tx2: - + Tx3: - + TRx: - + Thanks Adam Share this post Link to post Share on other sites
rickymok 0 Posted October 9, 2012 (edited) The WV-CS574 is ONLY supported Panasonic protocol controller. You may check that the Samsung SPC-100 build-in Panasonic protocol or not. Edited October 10, 2012 by Guest Share this post Link to post Share on other sites
RSWorld 0 Posted October 9, 2012 Thanks Ricky Im not expert but i started thinking that it was something to do with that im guessing that's what is the matter i need a Panasonic controllers as i tried everything all the D and P and 2400-9600 and cross wires etc etc Thanks for your reply as it confirmed what i was thinking may be the problem Adam Share this post Link to post Share on other sites
