Fireball 0 Posted October 7, 2012 Hello all, I've just picked up a couple of cameras from ebay - Bosch LTC 0610 (specs here: http://www.sourcesecurity.com/docs/fullspec/LTC%200610.pdf ) and Samsung SDN-550 (specs here: http://www.buythis.co.uk/pdf/1687.pdf ) I don't think either come with cables or a power supply, and I'm not sure which cables/power supply would be appropriate. I can't even find what amp rating the cameras require, although I have emailed the sellers to try and find out (but still no reply from either). Update: I've had a reply from the seller and bought a PSU for the Bosch. I just hope it takes a "normal" power jack plug. The Samsung appears to have "bare wire" connection ports for the power, but I can't see what connector the Bosch uses. So I'm not sure which cables/connectors to buy from ebay. I've been looking at combined power/BNC cables on ebay, but are these usually of good quality? Does it even matter much? Does this one look ok? http://www.ebay.co.uk/itm/WHITE-10m-20m-30m-50m-BNC-PLUG-PLAY-VIDEO-POWER-CABLE-FOR-CCTV-CAMERAS-/320943644629?pt=UK_CCTV&var=&hash=item4ab9bb5fd5 Or could someone recommend another one (it doesn't have to be from ebay)? Likewise for the power supply/supplies (if I need two - I probably will eventually, although for the moment I just need to test them rather than have both running at the same time). Any advice would be appreciated. Thanks for looking. Share this post Link to post Share on other sites