rwx 0 Posted October 10, 2012 I have a Q-See QT428 recorder and want two add one or two PTZ cameras. I use a web browser for most of my viewing, since I am remote from the recorder. Is it correct to assume that any PTZ camera can be controlled with the web browser controls? Share this post Link to post Share on other sites
shockwave199 0 Posted October 10, 2012 It's a question of the camera being compatable with the dvr. If it is, than the web browser will control it as well. Be sure your ptz's support pelco D or P, and you should be fine. If you haven't yet, you should also hit qsee and download the remote client app for your dvr. I find the ptz controller in the remote client app much better than the one in the web based app. Good luck. Share this post Link to post Share on other sites
rwx 0 Posted October 10, 2012 Re: compatibility with DVR, do you mean if the camera supports Pelco-P and -D then it should be compatible with the DVR? Share this post Link to post Share on other sites
shockwave199 0 Posted October 10, 2012 Correct. Take a look at the ptz menu page in the dvr. The drop down should include pelco D and P. My ptz is pelco D and has no problems at all. So just make sure the camera includes pelco D/P support and all should be fine. Good luck. Share this post Link to post Share on other sites
