mateck8888 0 Posted October 24, 2012 Anyone know where I can get one? They are discontinued... and I could use one. Thanks. Share this post Link to post Share on other sites
MaxIcon 0 Posted October 24, 2012 Hmm... I bought one not that long back, but looks like everyone's out of them. You can wire up your own pretty easily. The header for the card is 10 pins; 2 pins at one end enable the extra 4 channels with a jumper, and the other 4 pairs are signal and ground for the 4 channels. I forget which end is the enable, but it's easy enough to tell by looking at the card. Once you put a jumper on the right pins, restarting the Aver software should enable the next 4 channels (which are analog only, not IP). Let me know if you're not sure and I'll take a look at mine when I get a chance. You can then connect via standard 2 pin with BNC connectors at the other end. The main thing missing is the slot bracket that anchors the BNCs, but you could always make a bracket interface using, say, a DB9 connector. Share this post Link to post Share on other sites
mateck8888 0 Posted October 24, 2012 Thanks for the help. I never thought about that... but now that you bring it up, there are no electronics in the thing.... just outputs. I'll give that a try if I don't find a card anywhere. Thanks. Share this post Link to post Share on other sites
