rajansurat 0 Posted October 25, 2012 Dear Sir.... We are planning for 800 CP-BY703-E = 800 Camera..... and Dahua 1604HFS DVR...(50 DVR). to cover 4 Floor entire Building Can i Get Same output on LAN that we view on DVR...? we will use 40 inch LCD.... What type of network we have to design? any one Have Complete Solution? Share this post Link to post Share on other sites
tomcctv 190 Posted October 25, 2012 Go . Ip for that size of install. That will save you 60k alone that you don't need on DVRs. 40inch monitor for 800 cameras is another problem. Your going to have to give more info on your install I.E type on wiring method you have or going to install .... Distance to each camera ....network if any. And your full budget Share this post Link to post Share on other sites
rajansurat 0 Posted October 25, 2012 thansk for reply.... Which Product is beast for VIEW same DVR recording on LAN? 16th channel or 32 ? Standalone or PC base or other recording? Can use Fiber optics For LAN? we want best resolution... whats best product? Share this post Link to post Share on other sites
Debashish 0 Posted January 21, 2013 Rajan, CCTV requirements can be best suggested by experts after going through the site analysis. In this case, 16 channel may be good, and if you have money, fibre optics turn out to be the best. Obviously if you are going for DVR (analog based cameras), recording should be done in the DVR's Hard Disk. Or else, you can also go for IP. Share this post Link to post Share on other sites
