michalm 0 Posted November 7, 2012 Hi, I will install 2 types of Dahula cams: - IPC-HFW3200C - 2Megapixel Full HD Network IR-Bullet Camera - Cam 1, 3, 4, 7 - IPC-HFW3300 - 3Megapixel Full HD Network IR Camera - Cam 2, 5, 6 Please, check the attachment and tell me what do you think about the position of each camera. Thank you Share this post Link to post Share on other sites
hardwired 0 Posted November 8, 2012 You might consider moving C1/2 and C5/6 closer to the middle of each wall, leaving them crossing. That will place them closer to activity at the far ends, and eliminate unnecessary overlap/double coverage on each wall. Share this post Link to post Share on other sites
michalm 0 Posted November 8, 2012 You might consider moving C1/2 and C5/6 closer to the middle of each wall, leaving them crossing. That will place them closer to activity at the far ends, and eliminate unnecessary overlap/double coverage on each wall. This is a good idea ! Thank you Share this post Link to post Share on other sites
Kawboy12R 0 Posted November 8, 2012 Good plan. I was thinking about blind spots if someone approached from the corners. Hard to cover a building AND yard well with only 8 cameras. Share this post Link to post Share on other sites