cuetech 0 Posted November 9, 2012 I am running 8.5 and am using a simple BNC splitter to have one end connect up to the gv800 card and the other end out to a tv with a bca/rca adapter plugging into the Video input on my tv and every time I put the splitter on I get a video scramble or freeze on both the tv and in GeoVision for that camera. If I unplug 1 of the 2 cables from the 2-way split, then it works great, but the second I plug the 2nd cable in is when this happens. Why is it doing this and how do I fix it without buying a new card with tv-out which I cannot afford. Thank you so very much! P.S. - I have been using your this website for years to help troubleshoot issues with installs before, but this is the first time I registered and had a question. I know you guys all know your stuff and are light years ahead of me, so thanks again in advance for your assistance! Share this post Link to post Share on other sites
cuetech 0 Posted November 10, 2012 Does anybody have any suggestions please? Share this post Link to post Share on other sites
Neutech 0 Posted November 10, 2012 Video Dist amplifier You cant split a signal from a camera like the way your trying to do without loss or interference issues e.g - http://www.ebay.com/itm/CPI-VDA-1-1-2-Video-Distribution-Amplifier-for-CCTV-/370682820801?pt=LH_DefaultDomain_0&hash=item564e6af8c1 if your going to do this with more than one camer you will need appropriate input / output amp Share this post Link to post Share on other sites
cuetech 0 Posted November 10, 2012 Ok. That's what I had suspected, but I wanted to be sure before going out and buying a couple of them. Thank you very much for your reply and I look forward to being more active in these forums in the future Share this post Link to post Share on other sites
