lukiszyszka 0 Posted February 19, 2015 Thank You for it!!!!!!! Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 19, 2015 Well, that's all I have time to share for now, but I'll do my best to put together a comprehensive guide to the inner workings of these cameras and a guide to unbrick in any failed software situation.I will also post links to the 15-20 firmware files that I have collected. Thanks and take care. Rob Rob! Good job Well, as you said a novice, and what skills demonstriruesh all. You are a qualified specialist!!! If you've got a ready-made solution on hand, do not spent a wonderful time solving this challenging task. In fact, everything is much easier, but it is only realized with the experience! Share this post Link to post Share on other sites
cctvlks 0 Posted February 20, 2015 Lol! I thought you were one of the gurus! cctvlks, for region changes, contact CBX. He'll tell you if he can help with that model. I am a novice, It's dahua, not hikvision will u able to get this converted to English ? This time Hikvision one PAL Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 20, 2015 will u able to get this converted to English ? This time Hikvision one PAL When it gets into my hands - I will do it. In the meantime, you can put it out to share. All solutions in http://vk.com/albums221982133 Share this post Link to post Share on other sites
cctv_007 3 Posted February 20, 2015 I started a new thread @ viewtopic.php?f=19&t=44928 I will document in detail the recovery process for Dahua Cameras and will link in all necessary firmware files, tools, etc. If you want to contribute, please PM me what firmware files you might have and I will link them in to the post. Thanks, Rob Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 20, 2015 Good research Rob! Share this post Link to post Share on other sites
Dirk_D 0 Posted February 23, 2015 back to my problem - if I can't update the firmware I need to ship them back to China by tomorrow. I gave iTuneDVR access for two days but he was not helpful at all. PMs: Dirk_D wrote: Did you have any luck? I am not giving you indefinite access. That's OK if it's beyond your ability but I'm not comfortable leaving this open. Dirk_D! Your pure Chinese camera is simply gorgeous. Is it worth it change anything? Yes, I looked, everything you need and download everything that I needed! I have a few suggestions, but I will refrain their voice yet. I have already dealt with issues for customization azhahua equipment, recorders, cameras. Of course you need to do is have the device on hand. If you have a personal interest, you can use PSS To configure the device and getting the video from it. However, as far as I understand you have a commercial interest!!! _________________ www : http://www.iTuneDVR.ru vk : http://www.vk.com/iTuneDVR Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 23, 2015 back to my problem - if I can't update the firmware I need to ship them back to China by tomorrow. I gave iTuneDVR access for two days but he was not helpful at all. PMs: Dirk_D wrote: Did you have any luck? I am not giving you indefinite access. That's OK if it's beyond your ability but I'm not comfortable leaving this open. Dirk_D! Your pure Chinese camera is simply gorgeous. Is it worth it change anything? Yes, I looked, everything you need and download everything that I needed! I have a few suggestions, but I will refrain their voice yet. I have already dealt with issues for customization azhahua equipment, recorders, cameras. Of course you need to do is have the device on hand. If you have a personal interest, you can use PSS To configure the device and getting the video from it. However, as far as I understand you have a commercial interest!!! _________________ www : http://www.iTuneDVR.ru vk : http://www.vk.com/iTuneDVR Dirk_D! Cool! Yes, you gave me access to your camera. I looked at your IPC. I saw that your IPC pure china. I downloaded firmware from it. Researched it. Developed a solution for me. In your IPC nothing I did not change or reflash since this I did not have permission and we are nothing agreed. Make the appropriate conclusions and wrote you an answer. What you wrote it - not quite unclear how it will help you! I looked at your problem with the camera and see how to solve it. That's all Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 23, 2015 Dirk_D! I sent you a few more letters, and it was 16-02-2015. You're so much time thinking about what to write? Share this post Link to post Share on other sites
Dirk_D 0 Posted February 24, 2015 iTune, I'm sure you're trying to help, but it's lost in translation. Share this post Link to post Share on other sites
iTuneDVR 2 Posted February 24, 2015 iTune, I'm sure you're trying to help, but it's lost in translation. Share this post Link to post Share on other sites
nick4jc 0 Posted February 26, 2015 Hi guys. I have a Dahua HCVR5216A and its all in Chinese. I need a English firmware. My dvr date of manufacture is 12 Feb 2014. Hope you guys can help. Thanks! Nick Share this post Link to post Share on other sites
cctv_007 3 Posted March 7, 2015 Hi guys. I have a Dahua HCVR5216A and its all in Chinese. I need a English firmware. My dvr date of manufacture is 12 Feb 2014. Hope you guys can help. Thanks! Nick DH_HCVRxx04HG(P)-X_Eng_N_V3.200.0001.19.R.20140901.zip ....................... http://tinyurl.com/ovdux2z Share this post Link to post Share on other sites
MPD2011 0 Posted March 7, 2015 Hi Has any one tried the firmware files General_NVR4xxx_Eng_P_V3.200.0000.6.R.20141127 and General_NVR4xxx_Eng_P_V3.200.0000.3.R.20140711 from the below site: ftp://ftp.wintel.fi/drivers/dahua/NVR-sw/NVR4XXX/ when i flash firmware General_NVR4xxx_Eng_P_V3.200.0000.3.R.20140711 everything is ok. but when i flash the lastest General_NVR4xxx_Eng_P_V3.200.0000.6.R.20141127 firmware the output to the monitor has a pink tint to it. but ok via web login. is other people having any problems with it. downgrading fixes the problem. Share this post Link to post Share on other sites
vcka 0 Posted March 7, 2015 Hi Has any one tried the firmware files General_NVR4xxx_Eng_P_V3.200.0000.6.R.20141127 and General_NVR4xxx_Eng_P_V3.200.0000.3.R.20140711 from the below site: ftp://ftp.wintel.fi/drivers/dahua/NVR-sw/NVR4XXX/ when i flash firmware General_NVR4xxx_Eng_P_V3.200.0000.3.R.20140711 everything is ok. but when i flash the lastest General_NVR4xxx_Eng_P_V3.200.0000.6.R.20141127 firmware the output to the monitor has a pink tint to it. but ok via web login. is other people having any problems with it. downgrading fixes the problem. I am new to this forum, but reading everything and joining my "expirience", dahua has great platform but "short" hands.Sorry for that. But using opensource kernel and root file system, joining to that good west and east cost heads, should lead to best product ever. But ... are thinking different. Thats pain on my brain and heart... Share this post Link to post Share on other sites
BSecurity 0 Posted March 10, 2015 Hello I´m looking for this FW (or newest as possible...) in Spanish versión General_DVR5X04_Eng_P_V3.200.0001.16.R.20140821 Thanks!! Share this post Link to post Share on other sites
GNijenhuis 0 Posted March 10, 2015 I'm looking for new firmware for the NVR104-P http://www.dahuasecurity.com/products/nvr104108-p-714.html Because the nvr doesn't recognize my hdd (WD Red 1tb). And it only display 2 cam's of the 4 connected when they are set to full hd. When I set the cams to 1.3mp the nvr displays all 4. Anyone with similar problems? Share this post Link to post Share on other sites
iTuneDVR 2 Posted March 10, 2015 I'm looking for new firmware for the NVR104-P What is your firmware version? Share this post Link to post Share on other sites
vcka 0 Posted March 14, 2015 I'm looking for new firmware for the NVR104-Phttp://www.dahuasecurity.com/products/nvr104108-p-714.html Because the nvr doesn't recognize my hdd (WD Red 1tb). And it only display 2 cam's of the 4 connected when they are set to full hd. When I set the cams to 1.3mp the nvr displays all 4. Anyone with similar problems? Max 56Mbps incoming bandwidth Your nvr is not capable of what you want. Share this post Link to post Share on other sites
MaxIcon 0 Posted March 14, 2015 That shouldn't be a bandwidth issue, as 56Mbps max is 14Mbps per cam. You can run 4 1080p or 3MP cams at 8Mbps with no problem, giving 32Mbps total, and can usually drop them to 4Mbps with no obvious degradation unless running very high frame rates. This is a firmware design limitation, I'd think, but I don't have one of these NVRs. Share this post Link to post Share on other sites
tng5737 0 Posted March 15, 2015 The limitations are probably due to the 'player' inside the firmware. Share this post Link to post Share on other sites
sfmartin 0 Posted March 20, 2015 Hello Everyone, I am new on Dahua products. I just bought a Dahua NVR 3116. I am having some problems configuring the DDNS as the configuration is removed everytime the NVR restarts. I want to upgrade its firmware to the latest version available to see if this fix the problem. The FW version the NVR currently has is: 2.610.0000.5,Build:2013-5-25 (Serial No. PA3EP04200081). I was reading most of this post and what I could see is that the latest firmware available for this NVR (PAL version) is "General_NVR3xxx_Eng_P_V2.616.0000.0.R.20140110.bin" Can someone confirm if this is correct and if it is working properly for this NVR? This is the link where I got the firmware from: ftp://ftp.wintel.fi/drivers/dahua/NVR-sw/NVR-3XXX/ Thanks for your support! Sebastian Share this post Link to post Share on other sites
yozh 0 Posted March 27, 2015 Hello Guys, I`m looking for the latest and greatest firmware for IPC-HDW4200S. One of my cameras started rebooting again. SO I want to see if I can upgrade. Currently its running. Software Version2.400.0000.0.R, build : 2013-12-31 WEB Version3.2.4.161826 ONVIF Version2.3 Which has been stable for a while now since mid Sept 2014. EDIT: Ok Found a thread with all the firmware. viewtopic.php?f=19&t=44928 Share this post Link to post Share on other sites
chong83 0 Posted March 29, 2015 Try this firmware General_HCVR5104H_Eng_P_V3.200.0005.1.R.20140427.binhttp://iTuneDVR.ru/_ftp/DAHUA/HCVR/General_HCVR5104H_Eng_P_V3.200.0005.1.R.20140427.bin Model list HCVR5104C HCVR5104C HCVR5104HC HCVR5104HC HCVR5108HC HCVR5108HC HCVR5104HE HCVR5104HE HCVR5108HE HCVR5108HE HCVR5104H HCVR5104H HCVR5108H HCVR5108H i am facing some trouble in language this is my HCVR5104C infomation http://i25.photobucket.com/albums/c62/chong83/IMG_20150328_221307_zpsyehgades.jpg http://i25.photobucket.com/albums/c62/chong83/IMG_20150328_221357_zpsileb0i87.jpg after flash the General_HCVR5104H_Eng_P_V3.200.0005.1.R.20140427.bin http://i25.photobucket.com/albums/c62/chong83/IMG_20150328_221933_zpsogdebs31.jpg no language display i am try the firmware General_HCVR5104H_Eng_P_V3.200.0005.1.R.20140427.bin General_HCVR5104H_Eng_N_V3.200.0005.1.R.20140427.bin DH_HCVRxx04HG(P)-X_Eng_N_V3.200.0001.19.R.20140901.bin but all same, no language display ..... Share this post Link to post Share on other sites
yaserzahiri 0 Posted March 29, 2015 Hallo, i've been in the forums as a passive member for quite a while and now i like to contribute some little information to this forum. I noticed that with the v2.4x baseline firmware releases the well known telnet access root/vizxv is gone For me as a linux guy i wasn't happy with it at all so i took some time to reverse enginieer the firmware of my HFW4200s camera. I manage to analyse the telnet authorization part in the firmware. The /etc/passwd is still the same so the old password should work as always but the engineers at dahua changed the authorization so this file is never read for login. First i was able to patch the busybox binary to accept any passwords but a couple of hours later i was able to enter a valid password. In fact the secret login/password consists of a valid user with administrator privileges to the web interface (e.g. admin) and a password with a 'secret' prefix. Long story short as in my case with login 'admin' and password 'admin' my telnet login is like this: login: admin password: 7ujMko0admin So the prefix '7ujMko0' is the important part here. Finally i'm able to telnet login to my cameras again Can any of you double check on that? Happy telnet login! Regards, hdo Share this post Link to post Share on other sites
