udohans 0 Posted March 30, 2015 My NVR-1108 bought from a chinese Vendor makes problems after flashing the following firmware File: DH_NVR1xxx_Eng_N_V3.200.0000.3.R.20140812 I found this upgrade file while searching the Internet and now my web interface does not work and with HDMI the recorder is usable but there is no language to select. The Name of the icons start with &comstring..... After a short time of configuring the recorder hangs. I think I need the chinese firmware to flash back - to make the recorder working. Does anyone know where I can get a firmware to make the NVR work again correctly? Please help Share this post Link to post Share on other sites
killeo 0 Posted April 1, 2015 Hi, please need a firmware for dh dvr2108c somsing like this General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin I found some link http://itunedvr.ru/_ftp/DAHUA/DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin but: Not Found The requested URL /_ftp/DAHUA DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin was not found on this server.Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. i have firmware NTSC but i need PAL Share this post Link to post Share on other sites
iTuneDVR 2 Posted April 1, 2015 Hi, please need a firmware for dh dvr2108c somsing like this General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin I found some link http://itunedvr.ru/_ftp/DAHUA/DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin but: Not Found The requested URL /_ftp/DAHUA DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin was not found on this server.Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. i have firmware NTSC but i need PAL Yes, i remove it. Share this post Link to post Share on other sites
killeo 0 Posted April 1, 2015 а помочь можешь, или через ваш сервис за деньги? Share this post Link to post Share on other sites
killeo 0 Posted April 1, 2015 Hi, please need a firmware for dh dvr2108c somsing like this General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin I found some link http://itunedvr.ru/_ftp/DAHUA/DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin but: Not Found The requested URL /_ftp/DAHUA DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin was not found on this server.Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. i have firmware NTSC but i need PAL Yes, i remove it. а помочь можешь, или через ваш сервис за деньги? Share this post Link to post Share on other sites
iTuneDVR 2 Posted April 1, 2015 а помочь можешь, или через ваш сервис за деньги? Нужно было место вот и удалил, а до этого ссылка была доступна всем, какие тут деньги! http://itunedvr.ru/forum/phpBB3/viewtopic.php?f=15&t=311&p=1183#p1183 Share this post Link to post Share on other sites
udohans 0 Posted April 3, 2015 Hello, has anyone a NVR1xxx (NVR1108) Firmware for a chinese model? Please help Share this post Link to post Share on other sites
King Jack 0 Posted April 9, 2015 HI I now use, DH-IPC-HDW4300C always prompt offline, every time you need to restart. Hope can help me find this firmware, thank you. M-E:122242346@qq.com Software Version2.420.0005.0.R, build : 2014-12-05 WEB Version3.2.1.237466 onvif version2.4.1 S/N1C0086PAA00089 Copyright 2011. All Rights Reserved Share this post Link to post Share on other sites
King Jack 0 Posted April 9, 2015 为什么我找不到,.DH_General_IPC-HX5(4)XXX_Eng_P_Stream3_V2.420.0005.0.R.20141205 Share this post Link to post Share on other sites
videoaddict 0 Posted April 11, 2015 Hey Folks, hope someone can help me... I have an English NTSC Dahua IPC-HDBW2300R-Z dome camera with firmware 2.420.0000.3.R, build : 2014-07-23 and while the camera works well standalone, good integration with a VMS such as ExacqVision is problematic, as frames are dropped during recordings. My other two Dahua cameras (IPC-HDB4300C & IPC-HFW4300S) both on firmware 2.420.0000.0.R, build : 2014-04-19 are working and recording perfectly in the VMS. I did a test and upgraded my IPC-HFW4300S to firmware 2.420.0005.0.R.20141205, and interestingly it exhibited the same recording issues as the IPC-HDBW2300R-Z until I put it back on 2.420.0000.0.R.20140419. It must be that the VMS is not compatible with newer firmware than the base v2.420.0000 I therefore attempted to also downgrade the IPC-HDBW2300R-Z but none of the "IPC-HX3(2)XXX_Eng_N" or "IPC-HX5(4)XXX_Eng_N" firmwares I tried worked. Does anyone have/know of any alternate English NTSC firmware for the IPC-HDBW2300R-Z camera? Thanks in advance. Share this post Link to post Share on other sites
unzero 0 Posted April 13, 2015 Dear's, need original Chinese firmware for Dahua (NVR, DVR, IPC, HCVR) !! i don't can find it in internet =( May' be can give a link??? Share this post Link to post Share on other sites
Euly 1 Posted April 22, 2015 http://goo.gl/8yp5dm Dropbox with included firmware: General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0000.8.R.20150202.bin General_IPC-HX5(4)XXX_Eng_P_Stream3_V2.420.0000.8.R.20150202.bin General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0005.0.R.20141205.bin General_IPC-HX5(4)XXX_Eng_P_Stream3_V2.420.0005.0.R.20141205.bin General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0003.0.R.20140930.bin General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0000.0.R.20140419.bin General_IPC-HX5(4)XXX_Eng_P_V2.210.0000.21.R.20140613.bin Compatible IPC models: E5400 HD3530C HD4100-PT HD4200-PT HDB(W)5202 HDB(W)5502 HDB4X00C HDB4X00C-A HDB5XXX-V2 HDBW4X00E HDBW5100-A2 HDBW52(1)00 HDBW5300 HDBW5302 HDW4X00C HDW4X00S HF5100 HF5200 HF5200-A2 HFW4100B-A HFW4X00D HFW4X00S HFW4X03E HFW5100 HFW5200 HFW5202 HFW5300 HFW5302 HFW5502 HXW21XXR-X HXW22XXR-X HXW23XXR-X HXW4X00X-V2 K200 KW100 Share this post Link to post Share on other sites
unzero 0 Posted April 23, 2015 it is English firmware need Chinese version Share this post Link to post Share on other sites
DavidH 0 Posted May 2, 2015 Has anyone got firmware for IPC-HFW3301C I bought 4 of these a few years ago and am back trying to set them up properly but a firmware may be a place to start. I am also starting a new thread where I really need some setup help again. David Share this post Link to post Share on other sites
SyconsciousAu 0 Posted May 3, 2015 Has anyone got firmware for IPC-HFW3301C I bought 4 of these a few years ago and am back trying to set them up properly but a firmware may be a place to start. I am also starting a new thread where I really need some setup help again. David http://www.mmnt.net/db/0/0/ftp.wintel.fi/drivers/dahua/cam-fw/IPC-HX3%282%29XXX/Ver2.212 Share this post Link to post Share on other sites
DavidH 0 Posted May 3, 2015 thanks for that is it definitely genuine and no viruses etc? Share this post Link to post Share on other sites
MaxIcon 0 Posted May 3, 2015 Always hard to be sure about these. It's not clear who maintains this site, but a number of people have used the firmware from it, and so far no complaints posted. That doesn't mean it's safe, though. This is probably the single biggest downside to Dahua cams from non-approved vendors - lack of reliable firmware support. Share this post Link to post Share on other sites
DavidH 0 Posted May 3, 2015 unreliable firmware, no response when you email them and also their PSS and smartPSS are rubbish. I was asking for help in setting their software up on another link. No matter what I did it just does not work. I have installed genius vision and with a bit of work with my limited knowledge its recording. Still can't remote access the cameras though so not sure if thats just me being rubbish, the software being rubbish or the firmware just not allowing it. I do think its my knowledge though and not understanding port forwarding, ftp, rtsp, ddns and any other arrangement of random letters !! Cheers I have it downloaded but may not run it as yet as I bricked the last 4 IP cameras I have and 3 years later they are still sitting in a cupboard as I don't have the heart to throw them in a bin. David Share this post Link to post Share on other sites
mrkurasaky 0 Posted May 6, 2015 good day )) i have problems ) my chef buy from tao bao Chinese Dahua dh-nvr4216 and they come in Chinese language i Use ftp://ftp.wintel.fi/drivers/dahua/NVR-sw/NVR4XXX/ this frimware and anther version but it did not helping and webintrface didnot working now. i fink need Original frimware chinese in england language sombody have truble thiss or know how it can change Share this post Link to post Share on other sites
Euly 1 Posted May 8, 2015 Updated http://goo.gl/8yp5dm now includes: DH_IPC-HX5(4)XXX-Adreia_Eng_P_Stream3_V2.420.0006.0.R.20150311.bin General_IPC-HX5(4)XXX-Adreia_Eng_N_Stream3_V2.420.0006.0.R.20150311.bin Share this post Link to post Share on other sites
nick4jc 0 Posted May 11, 2015 Hi guys. I have a Dahua HCVR5216A and its all in Chinese. I need a English firmware. My dvr date of manufacture is 12 Feb 2014. Hope you guys can help. Thanks! Nick DH_HCVRxx04HG(P)-X_Eng_N_V3.200.0001.19.R.20140901.zip ....................... http://tinyurl.com/ovdux2z Thanks for the firmware. After I flashed it with the new firmware the description in menu all appear to have script language. What may seem to be the problem? Nick Share this post Link to post Share on other sites
zizouth 0 Posted May 17, 2015 Hi, I made an installation with some Dahua camera running on Luxiot VMS software (camera working on onvif driver) =>60 Dahua IPC-HDC4300C , Firmware 2.420.0002.0R Build 24/07/2014, working very fine =>15 Dahua IPC-HDBW2300R-Z, Firmware 2.420.0000.3R Build 23/07/2014, random disconnection , motion detection bug => 5 Dahua IPC-HFW2300R-Z, Firmware 2.420.0000.3R Build 23/07/2014, random disconnection , motion detection bug What king of firmware upgrade needed by IPC-HDBW2300R-Z & IPC-HFW2300R-Z? and if you have link , that's will be very nice! Thank's in advance Share this post Link to post Share on other sites
alexenergy 0 Posted May 22, 2015 Hi, i have a NVR-4216 V 3.200.0000.3 2014-7-11 The video channel are set for record continuos and motion (simultanely) I have a issue when i go the playback, when the record pass from continus to motion i have a second of black screen, and in some case the video was in stop... There is a firmware upgrade? Share this post Link to post Share on other sites
demolisher 0 Posted June 8, 2015 Hi I have 2 NVR's: NVR4408-8P and a NVR4416-16P I also have 3 different types of ipcams: SD50220S-HN / SD42212S-HN / SD42C212S-HN I'm wondering if there are any English firmware updates out for these devices. I bought them in August 2014. Thank you! Any help / advise would be much appreciated! Share this post Link to post Share on other sites
saniman 0 Posted June 8, 2015 hi there. i think i messed up my HCVR. i tried to flash firmware on my chinese HCVR. now all the interface showing weird numbers and words. anyone has the 8chanel 2 bay HCVR Chinese Firmware. i need to reload it back. this i the model number written on the box DH/HCVR5208A/-AF-DVR-11-A/8-4 previously it was version 3.200.0005 now 3.200.0001.19.R, Build Date: 2014-09-01 anyone here able to help out. thanks....... Share this post Link to post Share on other sites