Dahua firmware

[marya 0]

Hi,

i need last firmware for NVR3216,please help me

[Caporeira 0]

Anyone have new firmware for HBD3200C ?

I need new one because on my camera dosen't work snaphot

[buellwinkle 0]

What do you mean? A snapshot when you click the snapshot button on the web interface or a snapshot via URL command?

[Caporeira 0]

What do you mean? A snapshot when you click the snapshot button on the web interface or a snapshot via URL command?

 

Via URL command.

I have update my HFW2100 and now snapshon via URL command works

Now I need also new firmware for HDB3200C.

[eos 0]

Hi,

As said above, I have just installed the following firmwares :

NVR >>General_NVR3xxx_Eng_P_V2.610.0000.5.R.20130525

CAMS >>>General_IPC-HX3(2)XXX_Eng_P_V2.210.0001.0.R.20130517

 

I did that to have the same area selection system on the NVR or on the CAMS (= the new system with 4 frames + sensitivity + threshold) instead of the old one (grid + sensitivity).

 

Just after the installation, everything was OK : I had the frame system available when connecting to the cams and also in the NVR menu.

 

But today, the old grid system is back in the NVR menu :

I open the webpage of the NVR > “Config” > “Detect”. The new page opens like this (notice the threshold + sensitivity bar)

but after 2 seconds, the page turns like this :

 

Does anyone know how I can I fix that and recover the threshold control in the NVR ?

 

We are an alarm company that uses G4 and with the latest firmware and optimizer firmware installed in a 32 channel NVR with cameras with latest firmware, I noticed the threshold bar using Web Service in IE. I clicked on detect and it shows up for a split second then the old style screen comes back similar to what the poster said above.

 

What is up with this? Is the new style of "detect" far superior to the old way. I do not like the current way, it has not been too effective for our company. Maybe someone could find out.

 

Thanks

[MaxIcon 0]

You might want to clear your browser cache and remove the active-x software, if you're using that, so that it reloads fresh when you start it up. Sometimes the old software causes trouble if it's left behind.

 

My Dahua camera has an uninstall program in the start/program files/webplugin.exe folder, and the files are installed under /program files/webrec. Yours may have a different location, or it may be different for the NVR.

 

If that doesn't help, it may be a bug, and good luck with the Dahua support.

[denisiusmaximus 0]

Hi

 

I've already got it.

 

Here you are new Dahua Firmware V2.211.0000.0.R.20130726

 

http://www.filedropper.com/generalipc-hx32xxxengpv221100000r20130726

 

This works fine for me.

 

 

Is that PAL version or NTSC???? I really need PAL...

[ilkevinli 0]

That looks to be a PAL version.

 

Hi

 

I've already got it.

 

Here you are new Dahua Firmware V2.211.0000.0.R.20130726

 

http://www.filedropper.com/generalipc-hx32xxxengpv221100000r20130726

 

This works fine for me.

 

 

Is that PAL version or NTSC???? I really need PAL...

[teknologs 0]

That looks to be a PAL version.

 

Hi

 

I've already got it.

 

Here you are new Dahua Firmware V2.211.0000.0.R.20130726

 

http://www.filedropper.com/generalipc-hx32xxxengpv221100000r20130726

 

This works fine for me.

 

 

Is that PAL version or NTSC???? I really need PAL...

 

please upload mediafire,uploaded,hotfile,turbobit...

problem no download filedropper..

[msecure 0]

please upload mediafire,uploaded,hotfile,turbobit...

problem no download filedropper..

It will only work if you download from browser without any 3rd party download helper. Anyway, here is the mediafire link:

http://www.mediafire.com/?9nsympsxs1m6puv

Edited October 1, 2013 by Guest

[Caporeira 0]

It's possible to see the same area on D1 (Secondstream) resolution as HD resolution (Mainstream) ?

My camera HFW2100

[msecure 0]

It's possible to see the same area on D1 (Secondstream) resolution as HD resolution (Mainstream) ?

My camera HFW2100

No, you'll miss some area on the left & some on the right if 720p compare to D1. Top/bottom not really noticeable.

[pelo666 0]

Hello guys,

I have the latest NVR release "general-nvr-3xxx-eng-p-v2-610-0000-6-r-20130718" from my vendor:

 

http://fs01n1.sendspace.com/dl/abc62b6a94127e762b6452a5d5a70a02/524ad53326dc0668/2zzctz/general-nvr-3xxx-eng-p-v2-610-0000-6-r-20130718.zip

 

It is the PAL version. Just enjoy

[algilson 0]

Hello guys,

I have the latest NVR release "general-nvr-3xxx-eng-p-v2-610-0000-6-r-20130718" from my vendor:

 

http://fs01n1.sendspace.com/dl/abc62b6a94127e762b6452a5d5a70a02/524ad53326dc0668/2zzctz/general-nvr-3xxx-eng-p-v2-610-0000-6-r-20130718.zip

 

It is the PAL version. Just enjoy

 

Would still love a NTSC version if anyone has one?

 

Thanks,

 

- Al

[msecure 0]

Hello guys,

I have the latest NVR release "general-nvr-3xxx-eng-p-v2-610-0000-6-r-20130718" from my vendor:

 

http://fs01n1.sendspace.com/dl/abc62b6a94127e762b6452a5d5a70a02/524ad53326dc0668/2zzctz/general-nvr-3xxx-eng-p-v2-610-0000-6-r-20130718.zip

 

It is the PAL version. Just enjoy

Thanks, only thing new I notice is the Network info with netload & network test.

[Douglaster 0]

Damn, i applied the RVi russian firmware on my Dahua 3mp and now i cant apply any other firmwares !

 

Im stuck with a GUI in full russian !

 

Anyone have any idea of how apply a new firmware on it ?

 

Thanks

[msecure 0]

Damn, i applied the RVi russian firmware on my Dahua 3mp and now i cant apply any other firmwares !

 

Im stuck with a GUI in full russian !

 

Anyone have any idea of how apply a new firmware on it ?

 

Thanks

You can give it a shot via the PC using RS232 firmware upgrade but that depends which model of the 3MP you have.

Also, can consider taking russian language course

[Douglaster 0]

Damn, i applied the RVi russian firmware on my Dahua 3mp and now i cant apply any other firmwares !

 

Im stuck with a GUI in full russian !

 

Anyone have any idea of how apply a new firmware on it ?

 

Thanks

You can give it a shot via the PC using RS232 firmware upgrade but that depends which model of the 3MP you have.

Also, can consider taking russian language course

 

 

It must be an easier way to sort this

[Caporeira 0]

Hello,

 

pelo666 (General_IPC-HX3(2)XXX_Eng_P_V2.210.0001.0.R.20130517 ; it's a PAL version ; not NTSC).

http://www.sendspace.com/file/hyxiem

The extracted file contains a README.txt that says :

"Supported Devices: HDB(W)3202,HFW3101C,HF3101,HFW3X00C,F728WP,HF3300,HDB(W)3300,HFW3300,HF3301,HF3500,HF3500A,HF3200,HDB3200C,HF3110,HDB(W)3110,HDB(W)3101,HFW3110,HF3100,HF3211-F,HDW2100,HD2100,HFW2100,HF2100,HFW3100,HDB3100C,HFW3(2)105(2100S),HDW3100S,HDW2105S,HDW3105S,HFW3200S,HFW3202C"

 

 

I want to update my IPC-HBD3200C. I have read on readme.txt that the General_IPC-HX3(2)XXX_Eng_P_V2.210.0001.0.R.20130517.bin is for all that all devices:

 

Supported Devices:

HDB(W)3202,HFW3101C,HF3101,HFW3X00C,F728WP,HF3300,HDB(W)3300,HFW3300,HF3301,HF3500,HF3500A,HF3200,HDB3200C,HF3110,HDB(W)3110,HDB(W)3101,HFW3110,HF3100,HF3211-F,HDW2100,HD2100,HFW2100,HF2100,HFW3100,HDB3100C,HFW3(2)105(2100S),HDW3100S,HDW2105S,HDW3105S,HFW3200S,HFW3202C

 

It will really work, the same firmware for HDB3200C and HFW2100 ?

[MaxIcon 0]

I used the NTSC version of this release to update my HFW3300C and HFW2100N - no problems.

[Caporeira 0]

But all firmware (newer to) from HFW2100 will be work on IPC-HBD3200C ?

Because I can't found new firmware to my HDB3200C

So, I will try tommorow. I have two PAL cameras version.

============================================================

 

Ok, I have updated my HDB3200C from 2.103.0000.0.T, build : 2012-09-11 to 2.210.0001.0.R, build : 2013-05-17.

But now on SubStream I see less area as earlier The SubStream (D1 resolution) is very imported for me. Someone can recommend PAL firmware to 3200C ? With on SubStream normal area, and where url snapshot worked.

[toto0702 0]

Dear all,

 

I have 2 IP camera Dahua IPC HFW3200S and I have upgraded one of them with the last version (V2.211.0000.0.R.20130726).

 

The reason of this upgrading is that I have problem to calibrate the motion detection (threshold and sensitity values).

 

With this firmware I can correctly calibratebecause now Dahua has added a dynamic graph in the motion detection menu.

 

But now I don't have attachment in emails... Can you explain why and tell me if Dahua has published new firmware ?

 

Thank you

[Douglaster 0]

I used the NTSC version of this release to update my HFW3300C and HFW2100N - no problems.

 

Can you post it please ?

[MaxIcon 0]

Here's the link:

viewtopic.php?p=226171#p226171

 

On my PC, the forum software cuts off the link after the parentheses, so you can't just click on it. You have to copy and past the whole link into your browser.

[Douglaster 0]

Here's the link:

viewtopic.php?p=226171#p226171

 

On my PC, the forum software cuts off the link after the parentheses, so you can't just click on it. You have to copy and past the whole link into your browser.

 

Thanks !

 

Anyone knows the default tftp password for the 3200?

 

And last but not least, the last configtool ?