Dahua firmware

[udohans 0]

My NVR-1108 bought from a chinese Vendor makes problems after flashing the following firmware File: DH_NVR1xxx_Eng_N_V3.200.0000.3.R.20140812

I found this upgrade file while searching the Internet and now my web interface does not work and with HDMI the recorder is usable but there is no language to select.

The Name of the icons start with &comstring.....

After a short time of configuring the recorder hangs.

I think I need the chinese firmware to flash back - to make the recorder working.

Does anyone know where I can get a firmware to make the NVR work again correctly?

Please help

[killeo 0]

Hi, please need a firmware for dh dvr2108c

somsing like this General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin

I found some link http://itunedvr.ru/_ftp/DAHUA/DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin

but:

Not Found The requested URL /_ftp/DAHUA DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin was not found on this server.Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

i have firmware NTSC but i need PAL

[iTuneDVR 2]

Hi, please need a firmware for dh dvr2108c

somsing like this General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin

I found some link http://itunedvr.ru/_ftp/DAHUA/DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin

but:

Not Found The requested URL /_ftp/DAHUA DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin was not found on this server.Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

i have firmware NTSC but i need PAL

 

Yes, i remove it.

[killeo 0]

а помочь можешь, или через ваш сервис за деньги?

[killeo 0]

Hi, please need a firmware for dh dvr2108c

somsing like this General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin

I found some link http://itunedvr.ru/_ftp/DAHUA/DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin

but:

Not Found The requested URL /_ftp/DAHUA DVR/General_DVR21XX_Eng_P_V3.200.0001.6.R.20140617.bin was not found on this server.Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

i have firmware NTSC but i need PAL

 

Yes, i remove it.

 

а помочь можешь, или через ваш сервис за деньги?

[iTuneDVR 2]

а помочь можешь, или через ваш сервис за деньги?

Нужно было место вот и удалил, а до этого ссылка была доступна всем, какие тут деньги!

 

http://itunedvr.ru/forum/phpBB3/viewtopic.php?f=15&t=311&p=1183#p1183

[udohans 0]

Hello,

 

has anyone a NVR1xxx (NVR1108) Firmware for a chinese model?

 

 

Please help

[King Jack 0]

HI

 

 

 

I now use, DH-IPC-HDW4300C always prompt offline, every time you need to restart. Hope can help me find this firmware, thank you.

 

 

M-E:122242346@qq.com

 

 

 

 

Software Version2.420.0005.0.R, build : 2014-12-05

 

WEB Version3.2.1.237466

 

onvif version2.4.1

 

S/N1C0086PAA00089

 

Copyright 2011. All Rights Reserved

[King Jack 0]

为什么我找不到,.DH_General_IPC-HX5(4)XXX_Eng_P_Stream3_V2.420.0005.0.R.20141205

[videoaddict 0]

Hey Folks, hope someone can help me...

 

I have an English NTSC Dahua IPC-HDBW2300R-Z dome camera with firmware 2.420.0000.3.R, build : 2014-07-23 and while the camera works well standalone, good integration with a VMS such as ExacqVision is problematic, as frames are dropped during recordings. My other two Dahua cameras (IPC-HDB4300C & IPC-HFW4300S) both on firmware 2.420.0000.0.R, build : 2014-04-19 are working and recording perfectly in the VMS.

 

I did a test and upgraded my IPC-HFW4300S to firmware 2.420.0005.0.R.20141205, and interestingly it exhibited the same recording issues as the IPC-HDBW2300R-Z until I put it back on 2.420.0000.0.R.20140419. It must be that the VMS is not compatible with newer firmware than the base v2.420.0000

 

I therefore attempted to also downgrade the IPC-HDBW2300R-Z but none of the "IPC-HX3(2)XXX_Eng_N" or "IPC-HX5(4)XXX_Eng_N" firmwares I tried worked.

 

Does anyone have/know of any alternate English NTSC firmware for the IPC-HDBW2300R-Z camera?

 

Thanks in advance.

[unzero 0]

Dear's, need original Chinese firmware for Dahua (NVR, DVR, IPC, HCVR) !!

 

i don't can find it in internet =(

 

May' be can give a link???

[Euly 1]

http://goo.gl/8yp5dm

 

Dropbox with included firmware:

General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0000.8.R.20150202.bin

General_IPC-HX5(4)XXX_Eng_P_Stream3_V2.420.0000.8.R.20150202.bin

 

General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0005.0.R.20141205.bin

General_IPC-HX5(4)XXX_Eng_P_Stream3_V2.420.0005.0.R.20141205.bin

General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0003.0.R.20140930.bin

General_IPC-HX5(4)XXX_Eng_N_Stream3_V2.420.0000.0.R.20140419.bin

General_IPC-HX5(4)XXX_Eng_P_V2.210.0000.21.R.20140613.bin

 

Compatible IPC models:

E5400

HD3530C

HD4100-PT

HD4200-PT

HDB(W)5202

HDB(W)5502

HDB4X00C

HDB4X00C-A

HDB5XXX-V2

HDBW4X00E

HDBW5100-A2

HDBW52(1)00

HDBW5300

HDBW5302

HDW4X00C

HDW4X00S

HF5100

HF5200

HF5200-A2

HFW4100B-A

HFW4X00D

HFW4X00S

HFW4X03E

HFW5100

HFW5200

HFW5202

HFW5300

HFW5302

HFW5502

HXW21XXR-X

HXW22XXR-X

HXW23XXR-X

HXW4X00X-V2

K200

KW100

[unzero 0]

it is English firmware

 

need Chinese version

[DavidH 0]

Has anyone got firmware for IPC-HFW3301C I bought 4 of these a few years ago and am back trying to set them up properly but a firmware may be a place to start.

 

I am also starting a new thread where I really need some setup help again.

 

David

[SyconsciousAu 0]

Has anyone got firmware for IPC-HFW3301C I bought 4 of these a few years ago and am back trying to set them up properly but a firmware may be a place to start.

 

I am also starting a new thread where I really need some setup help again.

 

David

 

http://www.mmnt.net/db/0/0/ftp.wintel.fi/drivers/dahua/cam-fw/IPC-HX3%282%29XXX/Ver2.212

[DavidH 0]

thanks for that is it definitely genuine and no viruses etc?

[MaxIcon 0]

Always hard to be sure about these. It's not clear who maintains this site, but a number of people have used the firmware from it, and so far no complaints posted. That doesn't mean it's safe, though.

 

This is probably the single biggest downside to Dahua cams from non-approved vendors - lack of reliable firmware support.

[DavidH 0]

unreliable firmware, no response when you email them and also their PSS and smartPSS are rubbish. I was asking for help in setting their software up on another link. No matter what I did it just does not work. I have installed genius vision and with a bit of work with my limited knowledge its recording.

 

Still can't remote access the cameras though so not sure if thats just me being rubbish, the software being rubbish or the firmware just not allowing it.

 

I do think its my knowledge though and not understanding port forwarding, ftp, rtsp, ddns and any other arrangement of random letters !!

 

Cheers I have it downloaded but may not run it as yet as I bricked the last 4 IP cameras I have and 3 years later they are still sitting in a cupboard as I don't have the heart to throw them in a bin.

 

David

[mrkurasaky 0]

good day )) i have problems ) my chef buy from tao bao Chinese Dahua dh-nvr4216 and they come in Chinese language i Use ftp://ftp.wintel.fi/drivers/dahua/NVR-sw/NVR4XXX/ this frimware and anther version but it did not helping and webintrface didnot working now. i fink need Original frimware chinese in england language sombody have truble thiss or know how it can change

[Euly 1]

Updated http://goo.gl/8yp5dm

 

now includes:

DH_IPC-HX5(4)XXX-Adreia_Eng_P_Stream3_V2.420.0006.0.R.20150311.bin

General_IPC-HX5(4)XXX-Adreia_Eng_N_Stream3_V2.420.0006.0.R.20150311.bin

[nick4jc 0]

Hi guys. I have a Dahua HCVR5216A and its all in Chinese. I need a English firmware. My dvr date of manufacture is 12 Feb 2014. Hope you guys can help. Thanks!

 

Nick

 

DH_HCVRxx04HG(P)-X_Eng_N_V3.200.0001.19.R.20140901.zip ....................... http://tinyurl.com/ovdux2z

 

 

Thanks for the firmware. After I flashed it with the new firmware the description in menu all appear to have script language. What may seem to be the problem?

 

Nick

[zizouth 0]

Hi,

 

I made an installation with some Dahua camera running on Luxiot VMS software (camera working on onvif driver)

 

=>60 Dahua IPC-HDC4300C , Firmware 2.420.0002.0R Build 24/07/2014, working very fine

=>15 Dahua IPC-HDBW2300R-Z, Firmware 2.420.0000.3R Build 23/07/2014, random disconnection , motion detection bug

=> 5 Dahua IPC-HFW2300R-Z, Firmware 2.420.0000.3R Build 23/07/2014, random disconnection , motion detection bug

 

What king of firmware upgrade needed by IPC-HDBW2300R-Z & IPC-HFW2300R-Z? and if you have link , that's will be very nice!

 

Thank's in advance

[alexenergy 0]

Hi,

 

i have a NVR-4216 V 3.200.0000.3 2014-7-11

 

The video channel are set for record continuos and motion (simultanely)

 

I have a issue when i go the playback, when the record pass from continus to motion i have a second of black screen, and in some case the video was in stop...

 

There is a firmware upgrade?

[demolisher 0]

Hi

 

I have 2 NVR's: NVR4408-8P and a NVR4416-16P

 

I also have 3 different types of ipcams: SD50220S-HN / SD42212S-HN / SD42C212S-HN

 

I'm wondering if there are any English firmware updates out for these devices. I bought them in August 2014.

 

Thank you!

 

Any help / advise would be much appreciated!

[saniman 0]

hi there.

i think i messed up my HCVR.

 

i tried to flash firmware on my chinese HCVR.

now all the interface showing weird numbers and words.

 

anyone has the 8chanel 2 bay HCVR Chinese Firmware.

i need to reload it back.

 

this i the model number written on the box

DH/HCVR5208A/-AF-DVR-11-A/8-4

previously it was version 3.200.0005

now 3.200.0001.19.R, Build Date: 2014-09-01

 

anyone here able to help out.

thanks.......