help me in first time in fourm

[moradkarama 0]

hello , i have ip camera (ICA-HM100 ) planet Wired H.264 Mega-Pixel IP Camera

help me how can i connect it with dyndns.com

to see it from home

thanks

[voip-ninja 0]

hello , i have ip camera (ICA-HM100 ) planet Wired H.264 Mega-Pixel IP Camera

help me how can i connect it with dyndns.com

to see it from home

thanks

 

If the camera does not have built in DynDNS support then you will have to configure your home router for DynDNS and then use port forwarding to forward the necessary ports from the internet to the camera.

[moradkarama 0]

ok ,the camera support dyndns ,but what's the ports it uses it for configure??

[voip-ninja 0]

ok ,the camera support dyndns ,but what's the ports it uses it for configure??

 

Those would normally be ports that you want to allow the camera to be accessed to from the internet. You would need to forward those ports on your router.

 

Look at it this way....

 

I have DynDNS domain of "mycctv.webhop.org".

 

That domain will be resolved to my current IP address on the internet.

 

The camera has a port available for access, say that this port is 8080.

 

So, the way I would access my camera from the internet is by typing http://mycctv.webhop.org:8080 into a web browser from the outside internet.

 

HOWEVER - the router at home also needs to know what to do with this traffic because normally if it sees traffic come in on a port it will simply drop it.

 

So, you need a rule in the router that forwards port 8080 to the IP address of the camera. To make sure that this is "always good" you probably want to use a static IP address with the camera, OR you need to set up a DHCP reservation for the camera so that it always gets the same dynamically assigned IP address from the router.

 

As to specifics of your cameras setup, I can't help you... I don't know anything about that make/model camera and a google search does not provide a manual.

 

You've gotten your .05 of free help for today (from me). Good luck.