to3st4you 0 Posted December 4, 2012 Hi there, i have some problems getting in to a AVC760. I've done a hard reset like shown here: http://www.cctv4you.com/uploads/2010/05/AVC760_761_Hardware_Reset.pdf because the one who installed the system had no idea of the systems IP and PW. And now if i want to login via Video E server, the DVR is found. The IP is now 192.168.1.10 and so i think the reset worked. But if i login with admin/admin the Software says "login procedure failure" or something like this. Network Card in my NB has 192.168.1.1 and 255.255.255.0. Any ideas? kind regards, 3st Share this post Link to post Share on other sites
aibudo 0 Posted December 7, 2012 I'm sure that you have already double checked everything that you can think of, but,,,,,, Double check the "admin/admin" as correct. If someone else installed the system, they might have changed the default username/password to something else. Double check that the "gateway" address (192.168.1.1) is right in the DVR software. Change the "192.168.1.10" manually to "192.168.1.100" Double check the HTTP port. It is generally defaulted to "80". Change it to "81". On some online systems there is a conflict with port 80. May not help, but that's all that comes to mind right now. Dennis Share this post Link to post Share on other sites
