vic47haden 0 Posted December 5, 2012 Hi there I purchased a mini dome cctv camera off ebay and a 20m BNC plug and play power cable. I have connected the camera to the yellow phono input on the tv using the cable and a BNC female to RCA phono male connector adapter. I can get a good image on my son's Toshiba tv, but have tried exactly the same setup on four other tvs with no joy. They don't recognise the input at all. The camera is for my mother so I need it to work on her tv. If anyone can shed any light I would be very grateful. http://www.ebay.co.uk/itm/221053693856?var=520095647088&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 http://www.ebay.co.uk/itm/180990177340?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 Share this post Link to post Share on other sites
the toss 0 Posted December 5, 2012 You have set the TV to A/V input haven't you ? Share this post Link to post Share on other sites
vic47haden 0 Posted December 5, 2012 Yes, thanks for response. Got it sorted, was the bayonnet fitting on the bnc to phono adaptor it needed some adjustment but very strange fitting worked perfect in son's telly every time. wasted whole afternoon trying to figure it out! Share this post Link to post Share on other sites