Senechka 0 Posted December 9, 2012 Hello everybody! Stumbled into some March Network 3108. 7 cameras plugged into a 8 channel DVR. Added a new camera, but the channel seems to be blocked within the software. No Configuration software to be found anywhere, the Windows profile is limited, with no administrative access and the admin profile is locked with a password (unknown) Can anybody help me out here? I've been trying to find a manual, but the only thing that comes up is the installation support manual, nothing on the software part . . . I think these guys run a training course for this specifically and do not disclose the material freely, but maybe there's a copy kicking around somewhere. Any answers will be greatly appreciated. Share this post Link to post Share on other sites
Cecilio 0 Posted February 18, 2013 I will try this http://www.marchnetworks.com/products/vms/command-lite/download.aspx hope it will work tomorrow to the March camera that I need to check. Share this post Link to post Share on other sites
