fourcand 0 Posted December 13, 2012 I initially installed the Remote DVR Viewer from dvrdomain.com. It was installed to work on both my Blackberry cellphone and my iPad, and every thinks was working great until I changed my home router. I was using a BELKIN router and yesterday, I remove the BELKIN and installed instead an ASUS router because the ASUS is a newer and wider range router. Unfortunately since the installation of the ASUS, I am NO LONGER ABLE TO GET THE remote DVR to work. I reinstalled the old Belkin and tried to make the SAME MODIFICATIONS that were made on that router to the ASUS to NOAVAIL. I am NOT able to view my DVR security system as I used to using either my iPad or my BB. I kept getting a Network connection failure. Any suggestions from anyone would be appreciated. Ps: I have also attached for your review the modifications that were made to the BELKIN to enable the DVR to work. Thanks, Bob Share this post Link to post Share on other sites
Colm 0 Posted December 13, 2012 Hi possibley the old router had a different gateway IP to the new one and there for it would need changed in the dvr ..gateway ip... like if ones 192.168.0.1 and the others 192.168.1.1 Share this post Link to post Share on other sites
troy6363 0 Posted December 18, 2012 i would try resetting the belkin router. there should be a small pinhole on the back of the router. press it in for 5 secs.wait for it to reboot, in the mean time, restart your pc. from ur pc command prompt type ip config and make sure ur default gateway is correct.give your dvr a static ip address. be sure your port forwarding ports are correct.hope this helps Share this post Link to post Share on other sites