JWITHERSNC 0 Posted December 31, 2012 i have just installed a samsung system everything is work on the moniter. i am now trying to view on my computer. i have a cable modem conected to a dlink router. the dvr is wired to the router and the computer is wired to the router. i have followed the steps in the manual and i have had no luck what so ever. when i open exploer and put the ip address it takes me to a google search page where i found this forum.can anyone help with this. thanks jim Share this post Link to post Share on other sites
mirandasieck 0 Posted January 8, 2013 I think you have missed any step. Try once again.......... Share this post Link to post Share on other sites
aibudo 0 Posted January 8, 2013 Just to start, is the Cable Modem only a modem or is it also a router? That really shouldn't be an issue even at that if you are only wanting to monitor the system on your network (LAN). I'm also with mirandasieck, in that you must have missed something down the line in your setup. What is the gateway address on your router? Examples: 192.168.0.1 or 10.0.0.1 etc. What is the DVR network (LAN) IP address that your router gave you? Examples: 192.168.0.5 or 10.0.0.3 To select the DVR address, did you first set the dvr to DHCP, then set it to STATIC? What ports are shown be "port forwarded" in the router for the DVR? Enough questions for the moment. Dennis Share this post Link to post Share on other sites
